РРоман В.4 September 2026
★ 5,0It got to the point where I couldn't sleep at night. I had a crown placed, and they did it so it wouldn't hurt. I didn't expect that. There was no pain.
E-max veneers in Almaty: price, placement, reviews
E-max veneers are ceramic shells made of lithium disilicate. They are bonded to the front teeth to change color, shape, or conceal a defect. They are thin, but strength depends on the clinical situation. Tooth reduction is possible but not always required. The decision is made by the dentist after examination and diagnostics.
Cost calculator
Find out the preliminary cost in 20 seconds
How many teeth are you planning to cover with veneers?
What is the condition of the enamel and is preparation needed?
Is preliminary treatment needed?
What is the level of the clinic and the dentist?
Are additional procedures needed?
One last step
Leave your contact details and we'll send the estimate and suggest a convenient time.
Request received
Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.
How much do E-max veneers cost in Almaty
TreatmentDuration & warrantyPrice
Composition and properties of ceramic shells
Ceramic shells for teeth are made from lithium disilicate. The material combines strength with optics close to enamel. Let's look at the structure, fabrication methods, and how thickness affects appearance.
Lithium disilicate: material structure
Lithium disilicate is a crystalline ceramic. Crystals are distributed within a glass matrix and bear the load. The more crystals and the finer they are, the denser the structure. Strength depends on uniformity of distribution: voids and large clusters become stress points. For this reason, the mass is fired according to protocol, not "by eye." Visually, the material resembles enamel: it transmits light and does not look like an opaque spot. Color is set by pigment introduced into the mass. The shade is selected using a shade guide, but the final appearance depends on the underlying tooth dentin. If the dentin is dark, the ceramic may show through. The dentist then decides whether preliminary preparation is needed. The properties of lithium disilicate make it suitable for thin shells. The material does not wear down opposing enamel the way metal does. It is resistant to the acidic environment of the oral cavity. However, ceramic remains brittle: a sudden mechanical force can crack it. Therefore, the question of load is decided by the dentist based on the clinical situation.
Press technique and milling: two fabrication methods
- Press technique: heated ceramic is pressed into a mold; pressure fills all areas without voids, resulting in a dense and uniform structure.
- Milling: the blank is machined according to a digital model; this is how shells with complex geometry and precise marginal fit are made.
- Scanning: the impression is taken with an intraoral scanner, and the data goes into a digital model, speeding up the technician's work.
- Firing and glazing: after shaping, the shell is fired, then stains and glaze are applied so the surface is glossy and does not retain plaque.
- Try-in: the finished shell is tried on the tooth; the margin, contact with neighbors, and color under different lighting are checked.
Optical properties and thickness
The thickness of a shell is not an arbitrary number. It depends on how much tooth structure needs to be covered and what effect is desired. The thinner the ceramic, the more the dentin shows through. The thicker it is, the more opaque the color, but the greater the bulk. Lithium disilicate provides varying degrees of translucency depending on processing. The technician can make the layer more matte or lighter. The margin of the shell also affects appearance: a smooth transition into enamel looks more natural than a sharp boundary. Optics change under different lighting. In daylight, the ceramic appears cooler; under warm light, softer. Therefore, color is evaluated not only in the office but also outdoors. Thickness and translucency are selected individually. There is no universal recipe here: the dentist decides based on the clinical situation. If there is little enamel and the dentin is dark, a thin shell will not conceal the shade. Then another plan is discussed. Sometimes whitening or a restoration is enough, and shells are not needed at all.
Do teeth need to be shaved down for E-max veneers?
The decision about tooth reduction is made by the dentist based on the clinical picture. Ceramic veneers require space, and it is created in different ways. Let's look at when preparation is minimal and when it cannot be avoided.
When reduction is minimal or not required
The thickness of a ceramic veneer starts at 0.3 mm. If the enamel is smooth, without chips or stains, and the tooth color is satisfactory, that is enough for everything. In that case, preparation is reduced to light roughening: fractions of a millimeter are removed so the bonding material holds. Sometimes no reduction is needed at all — with tight contact with the gum and the correct tooth inclination. The decision is made by the dentist after examination. Scanning with a 3Shape intraoral scanner shows the relief more accurately than an impression, and the digital model shows where the ceramic will fit without a gap and where clearance is needed. The thin edge of the veneer must not press into the gum or extend beyond the tooth boundary. If the enamel is worn, dentin is exposed, or the tooth is displaced, the amount of removal increases. On a vital tooth without a nerve, preparation proceeds differently than on a devitalized one. The price of emax veneers in Almaty depends on the number of units and the complexity of preparation, not only on the material. How much tissue is removed also depends on the clinical picture.
Factors affecting the amount of preparation
- Enamel thickness: the less healthy layer there is, the more carefully the dentist works, and the more often a thin veneer is chosen or preparation is avoided.
- Tooth color: dark dentin shows through the ceramic, so sometimes more is removed under the veneer to mask the shade (sometimes the issue is addressed with whitening in advance).
- Position in the dental arch: with crowding or inclination, the tooth is first prepared orthodontically, otherwise the ceramic cannot be placed without extensive removal.
- Bite: deep overbite and lateral contacts determine where the veneer edge must remain outside the occlusion zone.
- Gum condition: an inflamed gum margin interferes with an accurate boundary, so hygiene is performed first, and only then preparation.
Comparison of reduction extent across different approaches
| Approach | Amount of removal | When applicable |
|---|---|---|
| No preparation | 0 mm | Smooth enamel, thin veneer |
| Minimal | Fractions of a millimeter | Light roughening for bonding |
| Standard | 0.3–0.5 mm | Chips, stains, color change |
| Extensive | More than 0.5 mm | Crowding, displacement, dark dentin |
How to care for E-max veneers?
Ceramic on teeth does not require special care, but it does not replace regular brushing either. Let's look at what to do every day, what to avoid, and how often to see the dentist.
Daily hygiene: brush and toothpaste
- Brush: soft or medium bristles with even tufts; hard bristles leave micro-scratches on the glaze and the veneer edge.
- Toothpaste: without abrasives or whitening granules — they polish the enamel around the veneer, and the boundary becomes noticeable.
- Movements: sweeping, from the gum to the incisal edge; circular motions on ceramic are unnecessary, they do not clean the seam at the gum.
- Floss: flat or superfloss, passed under the veneer at the gum margin, where plaque and food debris accumulate.
- Interdental brush: thin, for the spaces between teeth and areas near the gum, if crowns or a bridge are nearby.
- Water flosser: at minimum pressure, the stream runs along the gum, not directly at the point where the ceramic contacts the tooth.
What to limit in diet and habits
E-max ceramic is strong under compression but prone to chipping under sharp, localized force. It is best not to bite down on nuts, pits, ice, hard croutons, or caramel — an onlay can crack in a single bite. Opening bottles or packaging with your teeth is not advisable. Habits such as nail-biting, chewing on pens, or cracking seeds also place constant stress on the incisal edge. Coffee, tea, red wine, and berries gradually leave pigment on the ceramic and on the margins near the gum, especially if oral hygiene is poor. This is not a prohibition, but a reason to rinse your mouth after eating. At night, if you have bruxism, a protective night guard is needed — it is made from an impression or scan and absorbs the load. The decision about a night guard is made by the dentist after an examination. If a person smokes, plaque and pigment accumulate faster on the ceramic and gums, and gum inflammation occurs more often. The exact set of restrictions depends on the clinical picture: for one person, chipping occurs from hard food, while for another, onlays last for years without complaints.
Professional hygiene and check-ups
Home cleaning is not enough: plaque and calculus in hard-to-reach areas are removed by the dentist. Professional hygiene is needed regularly, but the specific frequency is determined by the dentist — it depends on the condition of the gums, the rate of calculus formation, and hygiene habits. During the appointment, ultrasound and polishing with a non-abrasive paste are used: coarse particles scratch the ceramic and expose the margin of the onlay. For diagnostics, cone-beam computed tomography is used — it shows the condition of the roots and bone tissue, while the 3Shape intraoral scanner records the position of the onlays and the bite. A microscope with 25× magnification helps examine the marginal area near the gum, where a defect cannot be seen with the naked eye. During the examination, the integrity of the ceramic, the marginal seal, the condition of the gums, and contacts with neighboring teeth are checked. If chipping, a gap, or gum bleeding appears, the visit should not be postponed. Routine check-ups make it possible to notice a problem before it becomes visually apparent. The interval between visits is selected by the dentist individually and is adjusted if the situation in the mouth changes.
E-max veneers for chipped and cracked teeth
A chip or crack in a front tooth is not always a reason for a crown. Sometimes the defect is covered with a ceramic onlay. The decision depends on the depth of the damage and the condition of the enamel.
When an onlay covers the defect
A ceramic onlay covers the defect if it does not extend beyond the enamel and does not reach the pulp. A crack without loss of tissue volume is also a case for this solution. The dentist examines it under a microscope with 25× magnification to assess how deep the line extends. If the chip involves the dentin but the pulp is not exposed, this option may still be possible. The onlay covers the damaged area and restores the anatomy. The ceramic is bonded to the tooth, so it is important that a sufficient volume of healthy tissue remains underneath. With a crack that runs vertically toward the root, the prognosis is different. Here, cost is not the main issue — first it is necessary to determine whether the tooth can be saved. Sometimes the defect affects only the corner of the incisal edge. In that case, the onlay covers it without preparation across the entire surface. Everything is determined by the clinical picture, not by the apparent size of the chip.
Situations where a veneer is not indicated
- Crack extending to the pulp: if the fracture line reaches the nerve, endodontic treatment is needed first, not an onlay. The decision is made by the dentist after an examination.
- Subgingival chip: when the defect extends below the gum level, the ceramic will not cover the area. A different restoration is needed, such as a crown.
- Tooth mobility: if the root has lost stability, an onlay will not stabilize the situation. The condition of the supporting tissues is assessed first.
- Bruxism: with nighttime grinding, the ceramic is under constant load. The dentist may suggest a protective night guard or another method.
- Insufficient tissue: if little enamel and dentin remain under the onlay, adhesion will be unreliable. In that case, a crown is chosen.
- Crack along the root: a vertical defect below the gum often means the tooth cannot be saved. An onlay will not help here.
Alternative solutions for deep damage
When the defect extends deep, an onlay does not cover the area. In such cases a crown is considered. It covers the tooth on all sides and is retained on the core. If the pulp is exposed, root canal treatment is performed first. Then a decision is made on what to place — a crown or an inlay. If there is a crack along the root, the tooth is often extracted. Then an implant or a bridge is planned. The prosthodontist reviews the cone beam CT data to assess the condition of the root and bone tissue. The 3Shape intraoral scanner helps take a digital impression for the future restoration. If the chip is small but the patient wants to close it without preparation, a composite restoration is sometimes suitable. It is cheaper, but the material changes color over time. A ceramic inlay or crown lasts longer. The choice depends on the clinical picture. The doctor explains the options and their limitations. Sometimes the tooth can be saved, sometimes not. This is determined by diagnostics, not by the patient's wishes.
E-max veneers or crowns: which to choose?
The choice between an onlay and a crown is decided not by fashion but by the condition of the tooth. A crown covers it entirely, an onlay only the visible surface. What suits a particular case is determined by the doctor based on the images.
Difference in the amount of preparation
A crown covers the tooth on all sides, so noticeably more tissue is removed for it — all around, including the contact and cervical areas. An onlay covers only the front and part of the side surfaces, and preparation stays within the enamel, often with almost no loss of it. This also explains the difference in sensation: under a crown, vital dentin is more often removed, under an onlay it is not. If the tooth wall is destroyed or it is already a treated tooth with a large filling, there is nothing to preserve, and the amount of preparation is dictated not by the method but by the defect. Sometimes an onlay is placed where a crown seems excessive: for example, with a small chip or discoloration of a single incisor. The opposite situation also occurs — a thin wall will not withstand the load under an onlay, and the doctor chooses a crown. A microscope with 25× magnification helps assess how much tissue actually remains and whether it is enough for an onlay. An intraoral scanner takes a digital impression, which is then used to model both restorations. The decision on the amount of preparation is made before work begins.
Indications for a crown and for an onlay
- Destruction of the coronal portion: when more than half of the tooth walls are lost, an onlay will not withstand the load, and the doctor suggests a crown.
- Treated tooth with a large filling: under a crown such a tooth is protected from fracture, whereas a thin onlay holds poorly on it.
- Discoloration: persistent darkening after trauma or treatment is more reliably covered by a crown, while an onlay is suitable for superficial staining.
- Chip or crack within the enamel: here an onlay is more often chosen, because the defect is small and the tooth walls are preserved.
- Shape and position: a minor correction of shape or slight rotation of a tooth is covered by an onlay, major changes by a crown.
- Abutment tooth for a bridge: if the tooth supports its neighbors, it is covered with a crown, not an onlay, otherwise the structure will not hold.
Comparison by key parameters
| Parameter | Onlay | Crown |
|---|---|---|
| Tooth coverage | Front and side surfaces | The entire tooth all around |
| Amount of preparation | Within the enamel | More, including the cervical area |
| Condition of the walls | Preserved walls required | Suitable when destroyed |
| Discoloration | For superficial staining | For persistent darkening |
| Shape and position | Minor correction | Major changes |
| Abutment tooth for a bridge | Not used | Used |
| Removability of the restoration | Not removed | Possible if necessary |
E-max veneers or lumineers: a comparison
Both options are ceramic veneers for the front teeth. They differ in thickness, strength, and how much tooth structure has to be removed. Let's break down how they differ in practice.
Thickness and the need for tooth reduction
Lumineers are thin ceramic shells that are bonded to the facial surface of the tooth. They are about 0.2–0.3 mm thick, so preparation is often minimal or not needed at all. E-max veneers are thicker: from 0.3 to 0.6 mm and more, depending on the clinical situation. A layer of enamel is usually removed for them — from 0.3 to 0.7 mm. The exact amount of preparation is determined by the dentist after an examination and imaging. If the enamel is thin or there are fillings in the bonding area, Lumineers may not be suitable: adhesion to dentin is weaker than to enamel. In that case, veneers with tooth reduction are chosen. The opposite situation: the tooth is heavily damaged or displaced — a thin shell will not cover the defect. In such cases, a thicker option is also needed. The decision is made based on a diagnostic model and the results of cone-beam computed tomography.
Strength characteristics
E.max is lithium disilicate, a pressed ceramic. The material has high flexural strength and handles chewing loads well in the anterior region. Lumineers are made of feldspathic ceramic. It is brittle in flexure, but because it is thin and fits tightly against the tooth, it performs stably as long as it is not overloaded. The key difference is how they behave when chipped. A thick lithium disilicate shell with a small chip can be repaired with composite directly in the mouth. A thin feldspathic shell with a chip usually has to be replaced entirely. There is another point: the thinner the shell, the higher the demands on fit accuracy. A gap of a few microns leads to debonding or a crack. That is why both technologies require scanning and magnification. Strength is also affected by how the shell is bonded: the adhesive cementation protocol matters more than the material's strength rating itself. With bruxism, both options require protection — a night guard — otherwise the ceramic will not hold up.
Where each option is used
- Shape and color: E.max masks discoloration, dark dentin after root canal treatment, diastemas, and minor tooth rotations; Lumineers work well when the position is even and the shade change is slight.
- Incisal edge: E.max restores chips and wear of the incisal edge, including covering a defect; Lumineers are not designed for this — a thin shell does not create volume where there is none.
- Front teeth: both options are used on incisors and canines, but the choice depends on how much tissue remains and how the tooth sits in the arch.
- Chewing load: Lumineers are not placed on premolars and molars; E.max works in the anterior region provided the bite is correct and bruxism is managed with protection.
- Orthodontic preparation: if a tooth needs to be moved, orthodontic treatment is done first, and the shells are placed after the position is stabilized.
E-max veneers or zirconia veneers: a comparison
Both materials are ceramic, but they behave differently. The choice depends on the smile zone, the bite, and how much enamel remains after preparation.
Optical properties and color
Lithium disilicate transmits light almost like enamel. The restoration looks lifelike: you can see subtle shifts of tone within its depth, and the edge blends into the tooth. Zirconia is denser, and light passes through it less readily. Zirconium dioxide masks the color of the underlying tooth, so it is chosen when there is dark dentin or a metal inlay beneath the shell. It used to look chalky, but multilayer blanks with a color gradient have fixed that. Still, right next to enamel, lithium disilicate gives a more natural transition. In the anterior region, this is noticeable. On posterior teeth, the difference in optics is barely perceptible; there, strength matters more. The shade is matched to the neighboring teeth, in daylight, with a try-in. If the smile is open and the teeth are backlit by the sun, lithium disilicate wins on lifelikeness. If a dark base needs to be masked, zirconia gives a more opaque color. It depends on the clinical situation.
Strength and wear resistance
Zirconia is stronger in flexural and compressive strength. A thin veneer made of it withstands loads where lithium disilicate may crack. That is why zirconia is more often placed on teeth with high chewing pressure and in cases of bruxism. Lithium disilicate is also a strong material, but its limit is lower. Chipping on it occurs with parafunctions and malocclusion. Wear resistance is high for both: ceramics do not wear down quickly and do not change color from coffee or tea. The question is not which material lasts longer on its own, but how it behaves in a specific mouth. With teeth clenching, zirconia is more resistant. With careful occlusion, lithium disilicate also lasts for years. Polishing the edge is important for both: a rough surface wears down the opposing tooth faster. The dentist decides after examination and imaging.
Comparison by main criteria
| Criterion | Lithium disilicate | Zirconia |
|---|---|---|
| Light transmission | high, close to enamel | lower, masks the underlying structure |
| Color | lifelike, with nuances | dense, uniform |
| Strength | moderate | high |
| Indications | front teeth, intact enamel | load-bearing areas, dark tooth stump |
| Thickness | minimal | requires more space |
| Risk of chipping | higher with parafunction | lower |
Free initial examination and treatment plan before E-max veneer placement
The initial appointment before E-max veneer placement in Almaty begins with an examination and diagnostics. The dentist assesses the condition of the teeth and gums, then discusses possible options with the patient.
What is included in the initial appointment
- Oral examination: the dentist checks the condition of the enamel, gums, and bite, noting chips, cracks, and old fillings that may affect veneer placement.
- Imaging and scanning: when indicated, cone beam computed tomography is performed and a digital impression is taken with a 3Shape intraoral scanner to assess tissue thickness and tooth position.
- Photo protocol: several images of the smile and individual teeth help document the initial situation and discuss the patient's expectations for the future restoration.
- Discussion with the dentist: complaints, preferences for shape and color, lifestyle, and habits that may affect wearing the veneers are discussed.
- Preliminary plan: the dentist explains which teeth require preparation, whether oral sanitation is needed, and which restoration options are possible in the specific case.
How the treatment plan is developed
The treatment plan is assembled piece by piece. First, the clinical picture is assessed: the condition of the enamel, bite, tooth position in the arch, and gum health. If there is caries or inflammation, sanitation is performed first; otherwise, the veneers cannot be bonded. Then the dentist determines how many teeth need to be covered and which shape and shade to select. Digital modeling helps at this stage: the 3Shape scanner builds a three-dimensional model, and the patient sees the expected result before work begins. Next, the extent of preparation is discussed. Sometimes minimal preparation is sufficient, sometimes more extensive preparation is required. The dentist decides this based on the clinical picture. The plan also includes preparatory steps: professional hygiene, gum treatment, and, if necessary, consultations with other specialists. Timelines and stages are discussed separately, but specific dates depend on the initial condition and the clinic's schedule. The patient receives a clear scheme: what is done at each visit and why. The plan is not set in stone — it may be adjusted during treatment if the situation changes.
What questions to ask the doctor
- How many teeth need to be prepared: ask which teeth fall within the restoration area and whether it is possible to avoid reshaping the neighboring teeth.
- How much preparation is involved: ask how much tissue will be removed and whether there is a minimally invasive alternative to preserve the enamel.
- What about the bite: if there are bite issues, find out whether the bite needs to be corrected first and how that will affect the timeline.
- How the result will look: ask to see a digital model or wax-up so you can preview the shape and color in advance.
- What to do about chips or debonding: discuss how to handle such situations and where to go for help.
- How to care for them: ask which toothbrushes, toothpastes, and interdental brushes you will need and how often to have a check-up.
What equipment is used when placing E-max veneers?
Placing E-max veneers relies on diagnostics and precise mechanical processing. Let's look at which devices are used at each step and why they are needed.
Diagnostic equipment
- Cone beam CT: provides a three-dimensional image of the jaw, used to assess enamel thickness, root angulation, and the condition of the bone tissue in the area of the future restoration.
- Intraoral scanner: takes a digital impression without a tray or paste, and the image goes straight to the lab for modeling the veneer.
- Microscope with 25× magnification: helps identify enamel cracks, old fillings, and marginal defects that are invisible to the naked eye and affect the fit.
- Laser: used to treat soft tissues when the gingival margin interferes with placement and the contour needs to be carefully adjusted.
Preparation instruments
Hard tissues are worked on with high-speed and contra-angle handpieces with water cooling. Cooling is essential: without it, the enamel and dentin overheat, which risks damaging the pulp. For fine grinding, fine-grit diamond burs are used — they remove tissue in small increments, and the dentist controls the depth. In some cases, no bur is needed: the margin is finished with a special strip or disc. The amount of preparation depends on the clinical picture: with intact enamel and proper tooth position, minimal tissue is removed; with chips and old fillings, more is removed. The dentist decides after examination and imaging. Under magnification, the preparation boundary is seen more precisely, and the risk of touching the neighboring tooth is lower. After preparation, the working field is isolated so that saliva and gingival fluid do not reach the prepared surface.
Equipment for bonding
Before cementation, the veneer is tried on and the marginal fit is checked. The enamel surface is etched with gel, then an adhesive is applied and cured with a light. The E-max ceramic is treated in the lab before placement: the inner surface is cleaned and silanized so that the composite cement bonds to it. The cement itself comes in different shades — the color is matched to the neighboring teeth, otherwise the restoration stands out against the enamel. The curing light must provide sufficient power, otherwise the cement will not set through its full depth. After bonding, excess material is removed, the occlusion is checked, and the transition is polished. Instrument sterility is ensured by Class B autoclaves: they use pressurized steam and can process hollow handpieces as well. There is no separate device that "improves" the result here — the outcome depends on the clinical picture and the precision of each step.
What to remember
The material and its characteristics
Lithium disilicate-based ceramic is not just a "beautiful material." It has properties that determine where it is appropriate to use. The pressed structure gives density and uniformity, and this affects how the onlay behaves under load. Color and translucency are selected layer by layer, so the restoration looks natural under different lighting. The material transmits light similarly to enamel, and the transition boundary remains barely noticeable. At the same time, the ceramic is brittle in flexure if the thickness is insufficient. Thin areas require careful handling and proper distribution of chewing load. The properties do not manifest on their own, but in combination with the shape of the stump, the bite, and the quality of fixation. If the tooth foundation is uneven or the gum is inflamed, the behavior of the restoration changes. Therefore, assessment begins with diagnostics, not with shade selection. A microscope with 25× magnification and cone beam computed tomography help see what is not visible to the eye. The 3Shape intraoral scanner provides a digital impression without a tray and paste.
Preparation and care
The amount of preparation depends on the initial situation. Sometimes minimal grinding within the enamel is enough, sometimes more is required — the doctor decides based on the clinical picture. There is no universal number that would suit everyone. If someone promises work "without any preparation at all," it is worth clarifying which method is meant and whether it is suitable in the specific case. Care after placement is simple, but regular. A soft-bristled toothbrush, non-abrasive toothpaste, dental floss or an interdental brush. At night, with bruxism, a protective night guard may be needed — it is made individually. Hard objects such as nuts or pens should not be bitten: ceramic does not like that. Coffee, wine, and tobacco smoking change the shade over time, especially along the edge. Professional hygiene helps detect marginal pigmentation and gum condition in time. Lasers and class B autoclaves are part of the sterile protocol, but not a replacement for home care. Regular checkups show whether everything is fine with the fixation and bite.
Choosing between options
The choice between ceramic onlays, crowns, and other solutions does not come down to a single criterion. The condition of the tooth, the amount of lost tissue, the bite, aesthetic expectations, and how the patient is ready to care for the restoration are compared. A crown covers the tooth entirely, an onlay covers only the visible part. Lumineers are thinner, but are not suitable in all situations. Zirconia options are stronger in flexure, but transmit light differently. What to choose is decided by the doctor after examination and imaging. Sometimes it is wiser to first treat the gum or treat caries, and only then discuss aesthetics. Sometimes it is worth waiting and observing. Rushing is a bad adviser here. A treatment plan is not a list of procedures, but a sequence of steps with a clear goal. If the patient understands why each stage is needed, the decision becomes informed. A second opinion is normal practice, not a sign of distrust. It is worth making an appointment when there are questions, not only when everything already hurts.
Questions about E-max veneers
We are open daily from 9:00 AM to 8:00 PM, seven days a week. The clinic is located in Almaty at 133/6 Kanysh Satpayev St., JAZZ Residential Complex. Phone for appointments — +7 747 093 89 86. Initial examination and treatment plan — 0 ₸.
Address: Almaty, 133/6 Kanysh Satpayev St., JAZZ Residential Complex. Parking for patients is free. Phone for appointments — +7 747 093 89 86. Appointments are available daily from 9:00 AM to 8:00 PM.
Warranty up to 5 years. The clinic has been operating since 1995, with a rating of 4.9 based on 312 reviews on 2GIS, Google, and Yandex. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 AM to 8:00 PM.
Installment plan for 24 months with Jusan bank or 12 months with Kaspi. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 to 20:00. Phone for appointments — +7 747 093 89 86.
Initial examination and treatment plan: 0 ₸. There is no separate fee for the first visit. Warranty up to 5 years. Installment plan for 24 months with Jusan bank or 12 months with Kaspi.
Parking is free. The clinic is in Almaty, 133/6 Kanysh Satpayev St., JAZZ residential complex. Appointments are available daily from 9:00 to 20:00. To book, call +7 747 093 89 86.
E-max veneers are placed for enamel darkening that cannot be removed by whitening, chips and cracks in the front teeth, diastemas and tremas, as well as for irregular shape or size of the crown. Contraindications are bruxism, pathological wear, deep bite without prior correction, insufficient enamel thickness, and active gum disease: these are treated first, then the restoration is planned. The only absolute limitation remains severe tooth destruction, when the stump cannot support thin ceramic. At the initial examination, the doctor assesses the condition of the enamel and bite and decides whether this option is suitable.
The cost consists of the number of restorations, the complexity of tooth preparation, the technician's work, and the type of fixation, so a single sum cannot be named in advance. The price is given by the doctor at the examination after assessing the condition of the enamel, the bite, and the scope of work. It includes diagnostics, temporary structures during the manufacturing period, and the veneers themselves. See current figures in the price section on this page.
With careful maintenance, E-max veneers last on average ten to fifteen years, and sometimes longer — up to twenty. The lifespan depends on enamel thickness, the quality of bonding, gum health, and habits: nighttime grinding, nail biting, and opening packages with the teeth quickly lead to chips. Regular hygiene, check-ups every six months, and a protective night guard for bruxism noticeably extend the life of the restoration. If a veneer comes loose or cracks, it can be replaced individually without redoing the entire row.
Yes, E-max veneers can also be used on the back teeth, but with caveats: the ceramic must be thicker and the coverage area larger than on the front teeth. The main limitation is the load: if a person has pronounced bruxism or large fillings on the side teeth, the dentist may suggest a crown or an inlay instead of a veneer. The decision is made after an examination and X-rays, because for the chewing teeth not only appearance but also strength matters. Sometimes veneers cover only the visible part of a side tooth rather than the entire surface.
At our clinic, the warranty on prosthetic work is up to 5 years, and E-max veneers are covered by this period. The warranty applies if the rules are followed: regular check-ups, professional hygiene, and no excessive loads or injuries. If the restoration becomes loose or chips due to a fault in the material or bonding, it is redone or adjusted. Cases related to trauma or failure to use a protective night guard for bruxism are considered separately.
You can book by phone or through the form on the website, and the initial examination and treatment plan are free of charge. During the consultation, the dentist examines the teeth, takes an X-ray if necessary, and shows what the smile will look like after placement. It is worth bringing previous X-rays and a list of any medications you take, if applicable. The appointment lasts about an hour so that all questions can be discussed.
E-max is lithium disilicate, a material that combines high strength with good translucency, so the restoration looks natural and does not darken over time. Unlike zirconia veneers, it transmits light better, and unlike feldspathic ceramic, it is stronger and chips less. The veneer can be made very thin, which sometimes makes it possible to avoid extensive tooth reduction. The material is suitable for both front and side teeth with proper planning.
Often the reduction is minimal — within 0.3–0.5 mm, and sometimes it can be avoided altogether if the bite and enamel thickness allow. It all depends on the initial position of the tooth and the desired result: the more the shape needs to be changed, the more tissue is removed. Before preparation, an impression or scan is taken to make temporary veneers and maintain comfort. If there is little enamel, the dentist may suggest orthodontic preparation instead of deep reduction.
Yes, E-max veneers cover chips and cracks well if the defect does not reach the nerve and the tooth is stable. The thin ceramic covers the damaged area while restoring shape and color. If the crack is deep or there are signs of pulpitis, treatment is carried out first, and the restoration is planned later. In some cases a crown is more reliable than a veneer — the dentist decides after an examination and X-ray.
The care is almost the same as for your natural teeth: a soft brush, non-abrasive toothpaste, dental floss, and a water flosser. Avoid biting nuts, ice, pens, and opening bottles with your teeth — the ceramic can chip. Professional hygiene is needed every six months to preserve the edges of the restoration and keep the gums healthy. For bruxism, the dentist makes a protective night guard to wear while sleeping.
Reviews of E-max veneers
4,9
38 reviews on the site
38 ratings
ННаталья Т.22 August 2026
★ 5,0I had a veneer made, they didn't rush me, they gave me time to think. Baglan explained everything. It didn't hurt. The next day they called to check on how I was doing.
ННурлан М.9 July 2026
★ 5,0Had veneers placed on the four front teeth, checked the bite at the end. Chewing became comfortable from the first day, so far no complaints. Almas is a thorough doctor, down to the smallest details. Five out of five. They took me right on time, no waiting. The lab made them in nine days, as promised, never had that anywhere before. That's it. They messaged the next day, asked how I was feeling...
ДДинара К.8 July 2026
★ 5,0My previous doctor moved away, so I had to look for a new one; to be honest, I went in feeling like I was going to my execution. They replaced the old bridge with crowns and checked my bite at the end. They saw me right on time, no waiting, no complaints about that. Thank you.
ААсель Т.30 June 2026
★ 5,0I was nervous the whole way. They replaced the old bridge with crowns and finished on time. The crown is indistinguishable from my own teeth. It seems to me that the people here simply love what they do. Thanks to the whole team.
ЖЖанар А.30 June 2026
★ 5,0Most stoyal dvenadcat let i nachal shatatsya. Postavili cirkonievuyu koronku, cvet podbirali pri dnevnom svete. V koridore pahnet ne bolnicey, a chem-to neytralnym. Vernus na profgigienu. Bez nervov. Administrator perezvonila, kogda obeschala, otdelno eto otmechu)
ЕЕржан Л.21 May 2026
★ 4,0My previous doctor moved away, so I had to find a new one. I got a zirconia crown. I even feel awkward that I put it off. Said explained why you shouldn't delay.
ААзамат П.16 May 2026
★ 5,0The crown was matched to the color of the adjacent teeth, the color was matched in daylight, and the color matched, no one notices anything, I compare it with what it was before. The contract and receipt were given without reminders, a small thing, but nice. I have nothing to compare it with, but it feels right. The hallway doesn't smell like a hospital, but like something neutral, as agreed. They messaged me the next day, asked how I was feeling, that never happened anywhere before. Sterility is visible, the instruments were opened in front of me, as it should be. At the fitting they adjusted the shape until it matched. The office is bright, the equipment is new. They saw me right on time, I didn't have to wait, and that wins you over
ММарина В.24 April 2026
★ 5,0Had a zirconia crown fitted, the shade was matched in daylight (my family laughed about it later at home), I even feel awkward that I put it off. They booked me at a convenient time, no "come at nine and wait", just as we'd agreed.
ССауле Г.16 April 2026
★ 5,0I initially just wanted to look around and compare prices — I had veneers done on four front teeth, and the shape was adjusted twice. On the downside, the hallway is a bit cramped when everyone is waiting, but that didn't affect my overall impression.
ЖЖанар У.29 March 2026
★ 4,0I have been treated elsewhere before. I had a crown placed, and they wrote out a step-by-step treatment plan.
ААзамат О.17 March 2026
★ 5,0The bridge lasted twelve years and started to wobble. I put it off for about a year and a half. I'll say this: the scary part was only before sitting in the chair. Quick. Shahzad is the kind of doctor you come back to. They replaced the old bridge with crowns, and the shape was adjusted twice.
ЖЖанна К.28 February 2026
★ 5,0I needed a second opinion. Chewing became comfortable from the first day. I had veneers done on four front teeth, the fitting took about twenty minutes. I came on my sister's advice. Overall, no regrets. They scheduled me at a convenient time, no "come at nine and wait" — that was never the case anywhere before. They gave me the prices right away, nothing was added at the end. Shoe covers, a cup, a napkin — little things, but everything was there, a small touch, but nice
ООльга Л.12 January 2026
★ 5,0Before this, I only came for promotional offers and never really got proper treatment. My previous experience was worse, so I have something to compare it to. Honestly, I didn't expect this. They replaced my old bridge with crowns. Shahzad explains things calmly and to the point.
ММеруерт М.31 December 2025
★ 5,0Zapsiyvalas po sovetu kollegi s raboty. Delali viniry na chetyre perednih zuba. Bahily, stakanchik, salfetka — melochi, no vse na meste — tut otdelnaya istoriya —.
ЕЕржан Д.4 November 2025
★ 5,0Replaced the old bridge with crowns. Only one thing I didn't like: the lobby was chilly. They answered questions even after the appointment, in the messenger, thanks for that too. I'll say this: the recommendations they give here aren't just for show.
ДДенис В.3 November 2025
★ 5,0I spent a long time choosing a clinic and read reviews all over the city. They placed a zirconia crown, and the shape was adjusted twice.
ССергей К.29 September 2025
★ 5,0The chip was at the front, and I felt awkward smiling (I couldn't believe it myself). I booked through the website, and they called back about ten minutes later. It seems like a small thing, but that's exactly what stuck with me. That's what won me over. The crown was color-matched to the neighboring teeth)
ААзамат Г.24 August 2025
★ 4,0They said elsewhere it just needs to be extracted. . . Indeed. I got veneers done, and everything was finished in one appointment.
ААсель Л.20 August 2025
★ 5,0Strange, but I wasn't even tired after the appointment. I would come back here for a second tooth too. One nitpick: the receptionist took a long time to find my file. Kuandyk explained why it's not worth putting it off. They fitted a zirconia crown, and a temporary crown was placed right away — that's a whole separate story —. The crown is indistinguishable from my own teeth. I recommend this clinic. Shoe covers, a cup, a napkin — little things, but everything was there. The hallway doesn't smell like a hospital, but of something neutral, I'll note that separately. The contract and receipt were given without me having to ask, a small thing, but nice.
ННурлан Р.18 August 2025
★ 5,0I was dreading it, to be honest. They replaced my old bridge with crowns, and the color was matched in daylight. Seems like a small thing, but that's what stuck with me. The crown is indistinguishable from my own teeth, and it feels like my own. All in all, no regrets. They took the impression with a scanner, no tray or goop in my mouth, and I'm grateful for that too. The receptionist called back when she said she would, just as we'd agreed. The hallway doesn't smell like a hospital, but like something neutral, and that won me over. The lab made it in nine days, as promised — a small thing, but nice)
ААйгуль О.17 July 2025
★ 5,0Got a zirconia crown, done on time. The crown is indistinguishable from my own teeth, I've already gotten used to the idea that it's all behind me. Almat is the kind of doctor you come back to. No stress. I'll put it this way: I was only scared until I sat in the chair.
ППавел К.5 July 2025
★ 5,0I was scared until the very last moment, but it was painless. I had veneers done on four front teeth, and the shade was matched in daylight
ММарина С.19 June 2025
★ 5,0Replaced the old bridge with crowns. The crown is indistinguishable from your own teeth, and it feels like your own. Thanks — that's a separate story —. The office is bright, the equipment is new. They arranged an installment plan on the spot, without running around to banks, I'll note that separately. They saw me right on time, no waiting, a small thing but nice. Shoe covers, a cup, a napkin — little things, but everything was there as agreed. The lab made it in nine days, as promised.
ППавел Т.23 April 2025
★ 5,0I had veneers done on my four front teeth, and a temporary crown was placed right away. The sterility is visible, the instruments were opened in front of me, and that wins you over — that's a separate story —. I'll keep coming here. Honestly, I expected worse..
ЖЖанна С.4 April 2025
★ 5,0Dumala chto budet dolshe. Zamenili staryy most na koronki, vremennuyu koronku postavili srazu.
ООльга М.17 March 2025
★ 5,0I needed a second opinion. I had veneers done on my four front teeth and they finished on time. One small complaint: the hallway is a bit cramped when everyone is waiting. Asylzhan is the kind of doctor you keep coming back to.
ААнна М.15 December 2024
★ 5,0Got a zirconia crown, the fitting took about twenty minutes. Said explains calmly and to the point. Shoe covers, a cup, a napkin — little things, but everything was there. Chewing became comfortable from the first day. Sterility is visible, instruments were opened in front of me. The administrator called back when promised. They created the chart right away, asked for my passport only once. The impression was taken with a scanner, without a tray and paste in the mouth, thanks for that too.
ООльга Р.25 July 2024
★ 5,0The crown was color-matched to the neighboring teeth, and the bite was checked at the end — you can't tell the crown apart from your own teeth. Overall, no regrets..
ННаталья Ж.29 January 2024
★ 5,0Booked on a colleague's recommendation (we laughed about it at home later) — booked through the website, they called back about ten minutes later. Got a zirconia crown)
ББекзат Л.3 May 2023
★ 5,0The chip was at the front, and it felt awkward to smile. I was nervous the whole way there. They fitted a zirconia crown and checked my bite at the end)
ССауле З.11 March 2023
★ 5,0Do etogo hodila tolko po akcii i tolkom ne lechilas Postavili cirkonievuyu koronku. Rassrochku oformili na meste, bez begotni po bankam, kak i dogovarivalis. Vot eto i podkupilo. Zhevat stalo udobno s pervogo dnya, chego i hotela. Na voprosy otvechali i posle priema, v messendzhere, otdelno eto otmechu. Laboratoriya sdelala za devyat dney, kak i obeschali)
ААнуар К.17 October 2022
★ 5,0At first the silence in the lobby was confusing — then I understood why. The old bridge was replaced with crowns, and a temporary crown was placed right away (we laughed about it at home later). Kuandyk is a thorough doctor, attentive to every detail. The impression was taken with a scanner, without a tray and impression material in the mouth, no complaints about that. The color matched, no one notices anything, so far no issues.
ЖЖанна С.25 May 2022
★ 4,0I needed a second opinion, and put it off for about a year and a half. I would come back here for the second tooth too. Almaz didn't pressure me and gave me time to think (I couldn't believe it myself). They placed a zirconia crown!
ДДенис С.2 March 2022
★ 5,0The crown was matched in color to the neighboring teeth, and the fitting took about twenty minutes. No stress. I would come back here for a second tooth as well. The lab made it in nine days, just as promised, the way it should be. Thanks to the whole team!
ЕЕржан З.27 November 2021
★ 5,0I booked on the advice of a colleague from work, and they did veneers on my four front teeth. The contract and receipt were given without me having to ask. I'll keep coming here, no question. The hallway doesn't smell like a hospital, but like something neutral. They set up my file right away, and asked for my passport only once. They answered my questions even after the appointment, via messenger, as agreed. The receptionist called back when she promised. Shoe covers, a cup, a napkin — little things, but everything was there, as agreed — and that was exactly what I was worried about. They arranged the installment plan on the spot, without running around to banks. I'm the type who asks again three times — and they were patient!
ММадина З.22 July 2021
★ 5,0I hadn't been to the dentist for about three years after the pandemic. I even feel awkward that I put it off. I ended up here by chance, I was nearby. They replaced the old bridge with crowns and finished on time. At the fitting they adjusted the shape until it matched. Honestly, I'm still surprised that it was painless.
ААлия П.5 July 2021
★ 5,0Replaced the old bridge with crowns; the fitting took about twenty minutes... They scheduled me at a convenient time, no "come at nine and wait" — thanks for that too.
Leave a review
Tell us how your treatment went. The review appears on the site once the front desk has checked it.