+7 747 093 89 86Daily 9:00–20:00Book a visit
Surgery and Implants

Korean dental implants in Almaty: types, prices, placement

Korean implants are a group of systems manufactured in South Korea: Osstem, Dentium, Megagen, and AnyRidge. They differ in their connection design, thread pattern, and range of sizes. The specific system is chosen by the dentist based on the clinical picture after an examination and a CT scan. The price depends on the components included and the clinic. The implant placement itself takes about 20 minutes. The visit is longer: before the procedure there is imaging and planning, and afterward a follow-up check.

Answer a few questions in the calculator below — and the administrator will send you a quote for your case before your visit.

30+years treating patients in Almaty
up to 5 yearswarranty on work
0%Installment plans: Jusan bank — 24 months, Kaspi — 12

How much does a Korean implant cost in Almaty

Full price list
TreatmentDuration & warrantyPrice
Izen implant, Korea — turnkey3–4 months3-year warrantyfrom225 600 ₸Message on WhatsApp
Any Ridge implant, Germany — Korea3–4 monthsWarranty up to 5 yearsfrom195 000 ₸Message on WhatsApp
MIS C1 implant, USA3–4 monthsWarranty up to 5 yearsfrom130 000 ₸Message on WhatsApp
Straumann implant, Switzerland2–3 monthsWarranty up to 5 yearsfrom324 000 ₸Message on WhatsApp
Temporary crown on implant1 visitDuring the healing periodfrom35 000 ₸Message on WhatsApp
All-on-4, implant placement on one jawfrom800 000 ₸Message on WhatsApp
Permanent denture on four implantsThe final price for a jaw is implant placement plus the prosthesisfrom1 000 000 ₸Message on WhatsApp
Initial surgical consultation0 ₸Message on WhatsApp
Temporary crown CAD/CAMfrom30 000 ₸Message on WhatsApp
Temporary CAD/CAM crown on implantfrom88 000 ₸Message on WhatsApp

The warranty applies if you come for free check-ups twice a year and get professional hygiene once a year, follow the doctor's recommendations and do not treat the same tooth at another clinic. The warranty does not cover trauma or loss of the restoration through carelessness. The warranty means free redoing or replacement of the work at the clinic's expense; the term and conditions are written in the treatment contract.

What the cost consists of

The price of the procedure includes diagnostics, the surgeon's work, the implant itself, and the healing abutment. The abutment and crown are calculated separately. The exact amount is given after an examination and CT scan: it depends on the volume of bone tissue and the number of implants being placed. Our "turnkey" package includes the implant, the surgery with anesthesia and sutures, the healing abutment, the abutment, and the permanent crown. Follow-up check-ups during the healing period are included in the price. Bone grafting and sinus lifting are not needed by everyone: if they are required, the dentist tells you before treatment begins, not along the way.

By systems

What types of Korean implants are there

Classification helps to understand how systems differ from each other and what determines the choice.

Tools and materials for this type of treatment, laid out on a light surface — an illustration for the section "How Korean implant systems differ"

Osstem Implant

Osstem is a South Korean system with a wide range of sizes and its own set of surgical instruments and drilling protocols. It is used both for a single defect and for full restoration of the dental arch. Whether it is suitable in a particular case is decided by the surgeon based on CT scan data.

Chairside appointment: dentist at work, shot over the assistant's shoulder — illustration for the section "What complications can occur during implantation and how to avoid them"

Dentium Implant

Dentium is a South Korean system with a conical implant-abutment connection and a range of different diameters. It has its own prosthetic components and its own surgical protocol. The doctor considers this system after imaging, when matching bone volume with the prosthetic task.

A jaw model and material samples on the dentist's table next to a mirror and probe — an illustration for the section "Which doctors place implants at the clinic"

Megagen Implant

Megagen is a South Korean manufacturer whose line includes the AnyRidge implant with pronounced threads designed for strong primary stability. The system's components and instruments are proprietary. The surgeon considers it after assessing bone density and height on CT.

The doctor shows the patient an image on the screen and explains the treatment plan — an illustration for the section "Korean Osstem implants: what you need to know"

Izen Implant

Izen is a South Korean implant system with its own sizes, abutments, and set of surgical instruments. Components from other systems do not fit it, so the crown and abutment are selected from the original line. The doctor chooses this system after examination and CT scan.

How a Korean implant is placed: stages of placement

Consultation: dentist and patient at a screen with an X-ray — illustration for the section "Diagnostics and treatment plan"
Step 01

Consultation and diagnostics

How the placement of a Korean implant proceeds: stages and timelines — it begins with an examination and cone-beam CT. The doctor assesses bone volume, plans the implant position, and prepares an estimate.

Preparation: the assistant lays out sterile instruments, the doctor puts on gloves — illustration for the section "Preparation and Surgical Stage"
Step 02

Preparation

If necessary, oral sanitation is performed: caries and gum inflammation are treated. If there is insufficient bone, bone grafting is planned. This stage may take from several days to several weeks.

The treatment stage itself: the doctor's gloved hands working inside the oral cavity — an illustration for the "Healing period" section
Step 03

Surgery

Placement is performed under local anesthesia. The surgeon forms a socket in the bone, inserts the implant, and sutures the gum. The procedure takes from 30 to 60 minutes per implant.

Follow-up visit: the doctor checks the result with a mirror, the assistant holds the saliva ejector — illustration for the section “Abutment and crown placement”
Step 04

Healing

After surgery, follow-up examinations are scheduled. During this period, the patient follows recommendations for hygiene and nutrition. The timeline for osseointegration is individual and depends on bone density.

End of appointment: the doctor beside the patient goes over aftercare instructions — illustration for the "Follow-up examinations" section
Step 05

Crown placement

When the doctor confirms the implant's stability, impressions are taken or the jaw is scanned with a 3Shape intraoral scanner and a crown is made. It is fixed to the abutment with permanent cement or a screw.

Doctors

Who provides care in this specialty

Clinic doctors who see patients for this service. A treatment plan is drawn up after an examination.

Price calculator

Find out the cost of korean dental implants in 20 seconds

Question 1 / 4
What dental problem are you experiencing?
How long have you had this problem?
Have you tried treating this before?
How would you prefer to pay?
One last step

Leave your contact details and we'll send the estimate and suggest a convenient time.

Request received

Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.

Farrukh Rustamovich Yuldashev — dentist at Dental-Center dental clinic in Almaty, portrait in work uniformThe estimate is reviewed by the clinic's implantologistTakes 20 seconds — an administrator will reply during business hours
Estimate based on the clinic's 2026 price listExamination and treatment plan — 0 ₸0% installment plan: Jusan bank — 24 months, Kaspi — 12

How do Korean systems differ from implants from other countries?

The difference between systems from South Korea, Europe, and the USA lies not in the country as such, but in the engineering solutions, alloys, and approach to protocols.

What do systems from South Korea have in common?

Most Korean systems grew out of a single engineering school and replicate each other in key parameters. Their threads are typically self-tapping, with a pitch designed for soft bone. The surface is sandblasted and acid-etched to increase the contact area with bone. The neck is most often micro-threaded — it distributes the load in the cervical area. Diameter and length come in a range with half-millimeter increments, giving the surgeon freedom when bone volume is limited. Threaded connections are standardized within the line, so prosthetics are predictable. The material is Grade 4 titanium or its equivalents, less often alloys with alloying additives. All of this is not unique properties, but a set of solutions replicated by different manufacturers. Hence the similarity of protocols: drilling, placement, healing abutment, impression. Differences between brands within the group are usually subtler than between groups of countries. The Osstem implant, whose price depends on the clinic and configuration, belongs to this same engineering family.

By what criteria are implant systems compared?

  • Alloy and surface treatment: these determine how quickly and tightly bone grips the implant and how predictable osseointegration is in the first weeks.
  • Thread geometry: the pitch, depth, and profile of the thread determine how confidently the implant engages soft or dense bone and how chewing load is distributed.
  • Connection type: internal cone, hex, or a combination — this affects the seal of the junction and the behavior of the gum around the neck.
  • Size range: the more diameters and lengths available, the more often it is possible to avoid additional bone grafting with a narrow ridge or closely spaced roots.
  • Prosthetic compatibility: the availability of original abutments, healing caps, and screws simplifies the prosthodontist's work and reduces the risk of mismatched components.
  • Availability and service: the speed of component delivery and the availability of instruments affect how quickly a problem is resolved if a screw breaks or is lost.

Comparison of Korean, European, and American systems

ParameterKorean systemsEuropean systemsAmerican systems
AlloyGrade 4 titanium and equivalentsGrade 4 titanium, often with modificationsTitanium and alloyed metals
SurfaceSandblasting and acid etchingVarious protocols, including hydrophilicOften hydrophilic or porous
ThreadSelf-tapping, pitch suited to soft boneVaried, suited to specific boneAggressive, for dense bone
ConnectionInternal cone and hexInternal cone, less commonly platformInternal cone and platform switching
RangeWide, in half-millimeter incrementsWide, but components are more expensiveWide, with a focus on prosthetics
ComponentsAvailable, shorter delivery timesMore expensive, longer delivery timesMore expensive, delivery times depend on stock
ProtocolStandardized, many training schoolsOften requires brand-specific trainingStrict, with clear recommendations

Does the country of manufacture influence the doctor's choice?

The country itself is rarely the decisive argument. The doctor looks at the clinical picture: bone density and volume, gum condition, distance to neighboring teeth and the mandibular canal. A specific system with the required diameter, length, and connection type is selected for these parameters. Korean lines cover most typical situations, so they are often chosen as a working option. European and American systems are chosen when specific geometry or a hydrophilic surface is needed. Logistics also play a role: if a component has to be waited for weeks, this affects planning. The doctor decides — based on cone-beam CT data and on which protocol he has mastered. The price of the Osstem implant, with implant prices listed in the price list, is also part of the comparison, but it does not override clinical criteria. It is useful for the patient to understand: the country is context, not a guarantee.

What equipment is used for implantation at the clinic?

Implantation relies not on a single device, but on a combination: diagnostics, surgery, monitoring. Below is what exactly is used at each stage and why.

Diagnostics before surgery

Before surgery, precise data about the bone and the location of nerves and blood vessels is needed. A cone beam CT scanner provides a three-dimensional image of the jaw, and from it the doctor chooses the position for the future implant site. An intraoral scanner takes a digital impression: instead of a tray with paste, a camera builds a model of the dental arch on the screen. These two studies complement each other, and together they allow planning the work before the patient sits in the chair. The condition of the gums and adjacent teeth is clarified separately, because the implant is placed in living tissue, not in emptiness. If a patient asks about Osstem implants cost, they first explain that the price consists of the system itself, the surgeon's work, and the scope of diagnostics — and without images it cannot be named. The course of the operation depends on the clinical picture: in some cases a standard set is enough, in others a microscope is needed to see the field precisely. The doctor decides based on the tomography data and examination.

Instruments and tools in the surgical office

  • Physiodispenser: a motor with speed and torque control used to prepare the implant site; too high a speed overheats the bone, so the parameters are selected according to its density.
  • Drill kit: instruments of different diameters are used in sequence, from thin to wide, and shape the channel precisely to the length and width of the future implant.
  • Microscope with 25× magnification: helps to see small vessels and the edges of the gum when working near a nerve or in a narrow area.
  • Laser: used for soft tissue treatment and for antiseptic treatment of the field; the scope of the intervention is determined by the doctor, not by the device itself.
  • Class B autoclaves: sterilize instruments with pressurized steam, including hollow and packaged kits; the operation does not begin without this step.
  • Surgical guides: printed from CT and scan data to transfer the plan to the chair; with an anyone implant, the price of such a guide is calculated separately or included in the plan — this is clarified in advance.

Why computed tomography is needed

Tomography shows the jaw in three dimensions: the height and width of the bone, the thickness of the cortical layer, and the course of the mandibular canal. From this data, the doctor understands whether there is enough volume for the implant and whether it will touch a nerve. The scan is done before surgery, not after, otherwise the whole point of planning is lost. Tomography also reveals hidden foci: cysts, root remnants, inflammation in the sinus. Sometimes it is what changes the plan — for example, requiring preliminary bone grafting. The radiation dose with cone beam imaging is lower than with conventional spiral, and this is one of the reasons why it is chosen for dentistry. The result is read by the doctor, not the program: the machine provides the image, the decision remains with the person. If the case is simple, one study is enough; with complex anatomy, the images are reviewed at different stages.

Equipment for monitoring after placement

  • Check-up X-ray: taken after placement to verify the implant's position and confirm there are no voids or damage nearby.
  • Intraoral scanner: used to take a digital impression for the future crown, without a tray or paste; the model is sent to the lab electronically.
  • Microscope with 25× magnification: used when it is necessary to assess the condition of the gum around the implant neck and the soft tissue margin.
  • Laser: used to treat tissue in cases of inflammation around the implant; the doctor determines whether the procedure is needed based on examination.
  • Class B autoclaves: sterilize instruments before every appointment, including the impression-taking stage and placement of the healing abutment.

How to choose a clinic for Korean implant placement?

Choosing a clinic in Almaty comes down to three things: who places it, with what, and how they manage it. Let's break down each.

What to look for at the first consultation

  • Examination and diagnostics: the doctor examines the oral cavity, assesses the condition of the gums and bone, and orders X-rays rather than immediately naming a surgery date.
  • Treatment plan: they explain how many stages are ahead, what is done at each one, and what the outcome depends on — the clinical picture, not promises.
  • Discussion of systems: ask which lines they work with and clarify whether they place the Dentium implants you are interested in.
  • Who is in charge: the surgeon and the prosthodontist should review the case together, otherwise the crown is later fitted to whatever result they got.
  • Your questions: ask about sterilization, about X-rays, about what they do if the implant fails to integrate. An evasive answer is a reason to think twice.

What documents and images to request

Ask to show the images on the screen and explain what is visible on them. Cone beam tomography provides a three-dimensional image of the jaw: from it, bone thickness, nerve and sinus locations are calculated. Without such an image, planning surgery blindly is risky, and this applies to any system, whether Korean or European. Next — a treatment plan on paper or in a file: which teeth, which stages, what temporary restoration during healing. Ask what you will be given after surgery: a discharge summary, recommendations, an image with the placed implant. If they ask to keep everything 'in the chart' and not show it, that is strange. The patient has the right to have copies of their images and reports — they will be useful if you decide to consult elsewhere. Separately clarify who exactly will perform the surgery and who will manage you afterward, so it doesn't turn out that one doctor consulted and another operates. AnyRidge implants, which are usually more expensive than basic lines, also require a proper image before surgery, not after.

What to clarify about the implant system itself

  • Origin and documents: ask to see the packaging and certificate for the specific implant that will be placed in you, not a general brochure.
  • Component compatibility: find out whether the clinic has a stock of healing abutments, abutments, and screws specifically for this line, so you don't have to search the city for them later.
  • Provision for the future: ask what will happen years down the line if the crown needs to be replaced or a component tightened — will the necessary parts remain available.

Why another clinic's name is not a guide

Compare two or three places in Almaty, but not by price — by treatment plan. Ask them to outline the stages: preparation, placement, healing period, prosthetics. If the clinic names only the sum and the timeframe, that is not a plan. Ask what is included in the cost: images, anesthesia, follow-up visits, the crown itself. Often the number on the business card and the final total differ. Clarify who is responsible for complications and under what conditions. And don't hesitate to ask uncomfortable questions: a doctor confident in their work answers calmly and without irritation. The decision is still yours, but the information gathered helps you make it.

Is bone grafting or sinus lift needed before placement

The implant is held not by the gum but by the bone. If there is not enough, the surgeon first considers preparation. The volume is assessed from the tomogram, and this determines whether the screw can be placed immediately or the tissue must first be augmented.

When bone volume is sufficient

The question of volume is decided by the CT scan. The image shows the height and thickness of the bone, the location of the mandibular canal and the maxillary sinus. If the wall is sufficient for the implant to sit in the bone without going beyond its boundaries, additional preparation is not needed. Then standard placement is planned. How long healing will take depends on the clinical picture. Sometimes there is enough bone, but it is loose in structure. Then the surgeon looks at the density and decides whether the area is suitable for loading. Sometimes the deficiency is small and it is closed by the implant itself with a wide thread. In each case, the conclusion is made based on the image, not on sensations. Cone beam computed tomography provides a three-dimensional picture, and from it you can see what cannot be read on a regular X-ray.

In which cases additional preparation is planned

  • Long-term missing tooth: after extraction, bone gradually resorbs, and over the years the site for the implant may become too narrow or too low.
  • Socket atrophy after extraction: if the tooth was removed traumatically or the socket healed with inflammation, volume is lost faster than usual.
  • Proximity of the maxillary sinus: in some people the sinus sits low, and there is not enough bone height above it for a screw of the required length.
  • Thin bone in the posterior regions: in the lower jaw, a canal with a nerve runs nearby, and the implant cannot be placed that deep.
  • Bone defects and cysts: a cavity in the bone or the consequences of inflammation are closed separately, before placement, and this is a separate stage with its own materials and healing times.
  • Multiple defects: when teeth are missing over a large span, volume is assessed across the entire area, not just one site.
  • The cost of the matter: Korean implants are priced lower than some other systems, but the preparation is calculated separately and is not included.

How bone grafting and sinus lift differ

MethodWhere it is usedWhat is done
Bone graftingAny area of the jawBone volume is added to a defect or a thin area
Sinus liftUpper jaw, posterior regionsThe sinus floor is raised and grafting material is placed underneath
Open sinus liftUpper jawAccess through a lateral window, when height is insufficient
Closed sinus liftUpper jawMaterial is inserted through the implant site, when the deficiency is small
Guided regenerationAny areaThe area is covered with a membrane so the material is not washed out
Ridge splittingNarrow ridgeThe bone is split apart and the implant is placed in the same procedure
Autogenous transplantationLarge defectsThe patient's own bone block is transferred to the area of deficiency

Who makes the decision about preparation

The decision is made by the implant surgeon together with the prosthodontist. The surgeon looks at the image and assesses where the screw will sit. The prosthodontist thinks about the future crown and how the chewing load will be distributed. Megagen implants — the price for them and for the preparation is calculated separately, and this is also part of the planning. The patient can refuse the stage, but then the plan changes: sometimes a shorter implant or a different location is chosen. Sometimes preparation is postponed and the area is monitored. The scope of the intervention and its staging are determined by the doctor based on the CT scan, not on a single examination in the chair. A second opinion is normal here: the plan can be discussed and clarified. It is useful to ask what alternatives exist and how they differ in prognosis. Sometimes the decision changes after additional images or a repeat CT scan.

Is a Korean implant suitable for complete absence of teeth?

With complete edentulism, the support is distributed across the jaw, and the system here is not the main limitation. Let's look at how this works in practice. More important is the volume of bone, the number of points, and what structure the prosthodontist will assemble.

How the dental arch is restored with complete edentulism

When no natural teeth remain, the task is solved not with single crowns but with a structure on several supports. Implants are placed in strategic zones — where the bone is denser and there is more volume. More often this is the anterior part of the mandible and the area between the mental foramina. In the maxilla, the bone supply is usually more modest, so sometimes volume is augmented first. Then a bar or custom framework is fixed to the supports, and the artificial dental arch is attached to it. The number of supports is calculated by the doctor based on the CT scan: in some cases four are enough, in others six or eight are needed. Cone beam computed tomography provides a layered picture of the jaw, and the positions are planned from it. A removable denture can remain as a temporary solution during the healing period. Complete edentulism is not a prohibition on implantation, but a different scheme of load distribution. The doctor decides, and the decision is based on the anatomy of the specific patient.

Options for implant-supported structures

  • Conditionally removable: the dental arch sits on a bar or telescopic attachments; the patient removes it themselves for hygiene, while the supports remain in the jaw.
  • Fixed: the framework is screwed to the implants; only the dentist can remove the structure, and hygiene requires interdental brushes and an irrigator.
  • Bar-retained: the supports are connected by a metal bar, which distributes the load between them and reduces the risk of overloading an individual implant.
  • Four-point support: when there is sufficient bone volume in the anterior region, the posterior implants are placed at an angle to bypass the sinus or nerve (an individual decision based on the CT scan).

What is considered when choosing a system for an edentulous jaw

  • Diameter and length: selected according to the bone thickness in the placement area, not by the system name or country of manufacture.
  • Connection type: Korean systems more often use an internal cone, which affects the fit of the abutment and the distribution of chewing load.
  • Availability of components: abutments, bars, screws and analogues are needed for the specific line — they are easier to find for common brands.
  • Compatibility with the prosthesis: the prosthodontist knows in advance which structure will be built on these supports; otherwise rework is needed, which means extra visits and costs for the patient.
  • Price: Korean systems cost less than European equivalents, and this affects the overall estimate when several supports are involved.

Does the result depend on the number of implants

The number of supports is not a competition but a calculation. The fewer implants, the higher the load on each of them. If the bone is dense and the prosthesis is small, four points may be enough. With thin bone or a large chewing load, the doctor will add supports. Korean systems are also placed with complete edentulism, but the specific line and number of points are determined by the CT scan, not by the price list. Sometimes the anatomy does not allow placing the required number — then the scheme is changed or bone is augmented first. The outcome depends on the clinical picture: bone density, hygiene, general health. Osseointegration cannot be guaranteed in advance. The doctor decides after examination and images. The patient should understand the logic: why this particular number of supports was chosen and what will happen if some of them are refused.

What to remember

Korean systems are a group of manufacturers

The term "Korean" on the market conceals not one enterprise but several companies. Each has its own product lines, sizes, instrument sets, and drilling protocols. Osstem, Dentium, and Megagen are different manufacturers, not synonyms. Their barcodes, packaging, and part numbers differ. The phrase "a Korean implant was placed" by itself says little about what actually ended up in the jaw. The practical takeaway for the patient is one thing: the doctor names the system and records its details in the chart. That way, years later, if a crown needs replacing or a repair is needed, the specialist can select compatible components instead of guessing from an X-ray. Country of origin does not automatically make an implant better or worse. What matters is the combination: the quality of the specific system, the surgeon's skill, and adherence to protocol. The same implant behaves differently when placed carefully versus in a rush. It depends on the clinical picture and on discipline at every stage — from marking to the final check of seating.

The doctor makes the decision based on the scans

Choosing the implant system, length, and diameter of the screw is not a matter of the patient's personal preference. It is a conclusion drawn from examination data. Bone density, bone volume, wall thickness, the position of the mandibular canal and maxillary sinuses, and the condition of neighboring teeth are all assessed. Cone-beam computed tomography provides a three-dimensional picture that reveals what cannot be seen on a standard panoramic X-ray. Sometimes the CT scan shows that the planned position is unsuitable and a different size or additional preparation is needed. That is why a conversation along the lines of "I want this particular system" is rarely productive. It is more reasonable to hear from the doctor why a specific option is proposed and what alternatives exist. If there is not enough data to make a decision, additional tests are ordered rather than proceeding blindly. The doctor makes the decision — but the patient has the right to understand the reasoning behind it.

Hygiene and check-ups affect longevity

An implant doesn't decay from cavities — it has no enamel or dentin. But around it there is gum and bone, and they determine how long the restoration will last. Plaque accumulates at the implant neck just as on a natural tooth, and sometimes more aggressively: in this area there is no periodontal ligament, which in a natural tooth partially absorbs the load and resists infection. If you don't clean regularly, inflammation of the mucosa develops, then bone loss, and the implant can lose its support. Therefore, home care is not a formality: a brush, dental floss or interdental brushes, a water flosser, and a toothpaste without aggressive abrasives. Professional cleaning is needed at the same frequency as for your natural teeth, and sometimes more often — your dentist determines this based on the condition of the tissues. Smoking, uncontrolled diabetes, and a tendency to periodontitis worsen the prognosis. This is not a prohibition, but a factor taken into account during planning and follow-up.

The price consists of several parts

The final amount is not the cost of a single screw. It includes the implant itself and its components, the surgeon's work, anesthesia, consumables, X-rays, and follow-up visits. The healing abutment, impressions or scanning, the technician's work, and the crown with the abutment are calculated separately. If bone grafting or a sinus lift is needed, that is a separate item with its own materials. Therefore, comparing offers by a single figure of 'turnkey implant' is almost meaningless: different sets are hidden behind the same wording. One option includes only placement, another — the entire path to the crown. It is worth clarifying what exactly is included, what is paid separately, and at what stage. It is useful to ask about component replacement and follow-up after crown placement. The price also depends on the complexity of the case: the volume of bone grafting, the number of implants, the need for sedation. The dentist decides this based on X-rays, not the price list. A transparent estimate with a list of items is more convenient than a total sum without a breakdown.

Questions about the Korean implant

The final amount depends on the implant system, the condition of the bone tissue, and the scope of work: the implant itself, the surgical stage, the healing abutment, and the future crown are calculated separately. It is impossible to give a figure in advance — it is determined by the doctor at the examination after the scan, and you can see approximate prices by item in the price section on the page. Placing an Osstem implant may cost more than the base price if bone grafting or a sinus lift is required. The initial examination and treatment plan at our clinic are 0 ₸, which allows discussing the estimate before work begins.

Osstem dental implants are a South Korean system used in various clinical situations, including single tooth defects and full arch restoration. The surface and thread geometry are designed for tight primary fixation, so early loading is acceptable in some cases. Osstem dental implantation requires preliminary diagnostics: cone-beam CT shows bone volume and nerve location. If you are looking for where to get Osstem dental implants in Almaty, start with a consultation and a scan — based on these, the doctor will tell you whether this system is right for you.

Korean Osstem implants are one of the common systems, but the choice depends not on the country of manufacture, but on bone density, ridge width, and future load. Korean Osstem implants are placed when there is sufficient bone volume; with a deficiency, grafting or a different implant geometry may be needed. Comparing systems by price without a scan is pointless: a cheaper option may require a more expensive surgical stage. At the consultation, the doctor will match the CT data with the prosthetic goals and suggest an option.

Osstem implant placement usually takes from forty minutes to an hour and is performed under local anesthesia; sedation is added if necessary. The surgeon creates access in the gum, forms the site strictly according to the system protocol, and inserts the implant with torque control. A microscope with 25× magnification and cone-beam CT help work more precisely in complex areas. After surgery, you receive care recommendations and a follow-up appointment date, and the doctor determines loading timing based on bone density.

South Korean implants are a group of systems that includes Osstem, Dentium, Megagen, and several other brands manufactured in South Korea. They share a more affordable price compared to European counterparts and a wide range of sizes for different clinical cases. Differences between brands lie in thread pitch, coating, and the set of surgical protocols, so the system is selected for the specific bone. Names like “осстем” and “osstem” are the same thing, not two different systems.

The differences between systems lie in thread geometry, the type of implant-abutment connection, and the set of surgical protocols, not in the country of origin. Osstem is often chosen for universal cases, Dentium for narrow ridges, Megagen when aggressive threading is needed for soft bone. None of the systems is universally best: selection is based on CT and future load. During the examination, the doctor will match the scan data with the prosthetic goal.

The main risks are related not to the brand, but to diagnostics and technique: inflammation around the implant, suture dehiscence, insufficient primary fixation, and damage to adjacent structures. Some complications appear in the first days — swelling, pain, bleeding — and are resolved by adjusting care and examination. Long-term problems more often occur with smoking, uncontrolled diabetes, and skipped hygiene. Preoperative CT and torque control during implant insertion reduce risks.

The warranty at our clinic is up to 5 years, and it covers the surgeon’s work and the installed restoration provided the follow-up protocol is observed. The conditions include regular examinations and professional hygiene: without them, it is impossible to monitor the condition of the tissues around the implant. The warranty does not cover cases related to trauma, heavy smoking, and advanced inflammation due to missed visits. The exact terms are fixed in the contract before treatment begins.

The osseointegration period usually ranges from three to six months and depends on bone density, location, and whether bone grafting was performed. In the lower jaw with dense bone, the process is faster; in the upper jaw after a sinus lift, it takes longer. The crown is placed after a follow-up scan, once the implant is stable and the gum has formed. Sometimes early loading with a temporary crown is acceptable, but the decision is made by the doctor based on CT data.

Yes, in some cases the implant is placed during the same visit as the extraction, if the socket is not inflamed and a sufficient bone wall remains. This technique reduces the number of surgeries and preserves tissue volume, but it is not suitable for everyone: with a cyst, a purulent process, or a thin socket wall, the surgeon will postpone placement. The decision is made based on cone-beam CT and the condition of the gum. If immediate implantation is not possible, a delayed protocol after healing is scheduled.

We are open daily from 9:00 AM to 8:00 PM, no days off. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. Phone for appointments: +7 747 093 89 86. Initial examination and treatment plan: 0 ₸.

Address: Almaty, 133/6 Kanyš Satpaev Street, JAZZ residential complex. Free parking for patients. Phone for appointments: +7 747 093 89 86. We are open daily from 9:00 AM to 8:00 PM.

Warranty up to 5 years. The clinic has been operating since 1995, with a rating of 4.9 based on 312 reviews on 2GIS, Google and Yandex. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM.

Installment plan for 24 months with Jusan bank or 12 months with Kaspi. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Initial consultation — 0 ₸. Examination, dental chart, written treatment plan: what we do, which materials we use, in what order, and how much it costs. You get the plan in hand; no payment is needed at this visit.

Parking is free. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Reviews of the Korean implant

4,9
32 reviews on the site
32 ratings
ДДана Н.4 August 2026
★ 5,0

I had to push to get an appointment (I called twice to confirm), but I get the feeling they just love what they do here. Quick. I had two implants placed, both took, and nothing was ever missing at check-ups. Farrukh showed me everything on the X-ray. The hallway doesn't smell like a hospital, but like something neutral, and that wins you over.

ААлия О.19 July 2026
★ 5,0

I booked through the website and they called me back about ten minutes later. They placed an implant in the position of the sixth tooth (we had a good laugh about it at home later). I spent a long time choosing and now I understand it was worth it. Ayauylm is a thorough doctor, down to the smallest details...

ААйгуль У.17 July 2026
★ 5,0

At my previous clinic they suggested a bridge and grinding down the neighboring teeth — I didn't want that, but Asylzhan really knows his stuff. They did the implant right after the extraction, and the crown was placed later. Honestly, I'm still surprised it was painless.

ВВладимир Т.15 July 2026
★ 4,0

Stomatologov ya ne lyublyu s detstva Stavil dva implanta, oba prizhilis, koronku postavili pozzhe. Zhuyu spokoyno, nichego ne meshaet, i eto glavnoe.

ЕЕржан В.6 July 2026
★ 4,0

I needed a second opinion, and just like that. One implant, everything per the contract...

ММаксим Д.22 June 2026
★ 5,0

I spent a long time choosing a clinic and read reviews from all over the city, and I only needed one implant, everything was done as per the contract, and no bone grafting was required. They answered my questions even after the appointment, via messenger, which I want to highlight separately (I couldn't believe it myself).

The clinic administrator answers patient messages at the front desk
Still have questions

Still have questions about Korean dental implants?

Message us on WhatsApp or call — the clinic is open daily from 9:00 to 20:00. The initial consultation and treatment plan are free (0 ₸), and parking is free.

free parking133/6 Kanysha Satpayevadaily, no days off9:00 — 20:00Jusan bank — 24 months, Kaspi — 120% installment plan
Calculate the cost