+7 747 093 89 86Daily 9:00–20:00Book a visit
Hygiene and Whitening

Air Flow teeth cleaning in Almaty: how it works, who it's for, how much it costs

The procedure removes soft plaque and pigment from the tooth surface using a mixture of water, air, and powder. Unlike ultrasonic scaling, it does not wear away the enamel. There is no whitening effect: the natural shade is restored, and only stains are lightened. It is not suitable for everyone; the decision is made by the doctor after an examination.

Answer a few questions in the calculator below — and our administrator will send you an estimate for your case before your visit.

30+years treating patients in Almaty
up to 5 yearswarranty on work
0%Installments: Jusan bank — 24 months, Kaspi — 12

How much does Air Flow cleaning cost in Almaty

Full price list
TreatmentDuration & warrantyPrice
Professional Light Cleaning45 minutesFor minimal buildupfrom14 990 ₸Message on WhatsApp
Comprehensive hygiene: ultrasonic scaling, Air Flow, polishing, fluoride60 minutesBoth arches in a single visitfrom20 000 ₸Message on WhatsApp
Cleaning for heavy tartar buildup2 visitsWith subgingival depositsfrom30 000 ₸Message on WhatsApp
Initial consultation0 ₸Message on WhatsApp
Preventive examination0 ₸Message on WhatsApp
Light Professional Teeth Cleaningfrom21 000 ₸Message on WhatsApp
Professional hygienefrom14 990 ₸Message on WhatsApp
Air Flow cleaningfrom10 000 ₸Message on WhatsApp
Scaling, one archfrom10 000 ₸Message on WhatsApp
Enamel remineralizationfrom5 000 ₸Message on WhatsApp

How much does Air Flow cleaning cost in Almaty

The cost of the procedure depends on the number of areas treated, the condition of the teeth, and whether additional manipulations are needed. In the clinic's price list, the price is given after an examination. The exact amount is quoted at the initial appointment, once the doctor sees the scope of work. You can book a consultation by phone or through the form on the website.

By scope of the procedure

Stages of Air Flow Cleaning

Helps you understand when air polishing alone is enough and when it is part of comprehensive hygiene.

The instruments and materials for this type of treatment, laid out on a light-colored surface — an illustration for the section "Sodium bicarbonate-based powder"

Air Flow as a standalone procedure

Air polishing without prior ultrasonic scaling: a stream of water, air, and fine powder removes soft plaque, biofilm, and pigment from the enamel, from the fissures, and from the interdental spaces, after which the teeth are polished. This cleaning does not remove hard calculus, so the dentist considers it when no calculus is seen during the examination but the patient is bothered by staining from coffee, tea, or tobacco.

A jaw model and material samples on the dentist's table next to a mirror and probe — an illustration for the section "Glycine-based powder"

Air Flow as part of comprehensive hygiene

Air polishing as one of the steps of professional hygiene: first, ultrasonic scaling chips away mineralized deposits above and below the gum line, then Air Flow removes the remaining plaque and pigment, followed by polishing and fluoride treatment. It differs from the standalone procedure in that it also addresses calculus. The dentist chooses this option when dense supra- or subgingival deposits are visible during the examination.

Stages of Air Flow cleaning

Consultation: doctor and patient at a screen with an X-ray — illustration for the section "Examination and Diagnostics"
Step 01

Examination and diagnostics

The doctor examines the oral cavity, takes cone-beam CT images if necessary, and assesses the condition of the enamel and gums. At this stage, the scope of the procedure is determined and the treatment mode is selected.

Preparation: the assistant lays out sterile instruments, the dentist puts on gloves — illustration for the section "Preparing for the procedure"
Step 02

Preparation for the procedure

The patient is explained how the procedure will proceed; if sensitivity is increased, topical anesthesia is applied. The working area is isolated so that powder and water do not get on the mucous membrane.

The treatment stage itself: the doctor's gloved hands working in the oral cavity — an illustration for the "Air Flow treatment" section
Step 03

Air Flow treatment

A stream of water, air, and fine powder is directed onto the tooth surface. The mixture removes soft plaque and pigmentation from hard-to-reach areas. The doctor controls the pressure and the angle of the handpiece.

Follow-up visit: the dentist checks the result with a mirror while the assistant holds the saliva ejector — illustration for the section “Polishing and Fluoride Treatment”
Step 04

Polishing and fluoride treatment

After treatment, the teeth are polished with paste and brushes, then a fluoride-containing composition is applied to strengthen the enamel. Polishing makes the surface smooth, which slows down the buildup of new plaque.

End of appointment: the doctor beside the patient goes over aftercare instructions — illustration for the "Post-procedure recommendations" section
Step 05

Recommendations after the procedure

The doctor explains care and restrictions for the first few days: avoid staining foods and drinks, use a soft brush and toothpaste for sensitive teeth. The next preventive visit is scheduled individually.

Our Doctors

Who provides this treatment

The clinic's doctors who see patients for this service. A treatment plan is drawn up after the examination.

Price calculator

Find out the cost of Air Flow teeth cleaning in 20 seconds

Question 1 / 4
What concerns you about the condition of your teeth?
How long has it been since you had your teeth cleaned by a dentist?
What concerns you about the condition of your gums?
How would you prefer to pay?
One last step

Leave your contact details and we'll send the estimate and suggest a convenient time.

Request received

Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.

Abdullayev Bekzat Ruslanovich — dentist at Dental-Center dental clinic in Almaty, portrait in work uniformThe calculation is reviewed by the clinic's dental hygienistTakes 20 seconds — you'll get a reply from our administrator during business hours
Estimate based on the clinic's 2026 price listExamination and treatment plan — 0 ₸0% installments: Jusan bank — 24 months, Kaspi — 12

What is this procedure and how does it differ from ultrasonic cleaning?

Air Flow is a method of cleaning teeth with a mixture of air, water, and fine powder. An ultrasonic scaler works differently: it removes deposits with the vibrations of a metal tip.

How the device works

The device delivers a pressurized stream that mixes air, water, and abrasive powder. The particle size varies: a coarser powder is used for dense plaque, and a finer one for sensitive areas and the cervical region. The stream is directed at an angle to the tooth surface, and the particles knock away soft and pigmented plaque, food debris, and biofilm. This flow does not remove hard calculus: that requires different equipment. The treatment covers the entire crown, including fissures, interdental spaces, and the area near the gum line where a brush can barely reach. A special nozzle allows treatment around implants, crowns, and braces. The doctor selects the powder consumption and pressure according to the situation: on thin enamel, with exposed tooth necks, or in a smoker with dense pigmentation, the parameters will be different. The procedure is often called whitening, although the lightening here comes from removing pigment, not from chemicals. These are different services with different goals, and the doctor decides what is indicated in each case.

Comparison with an ultrasonic scaler

ParameterAir FlowUltrasonic scaler
What it removesSoft and pigmented plaqueMineralized calculus and dense deposits
How it worksStream of air, water and powderVibrations of a metal tip
Main areasFissures, interdental spaces, cervical areaSupra- and subgingival calculus, dense deposits
SensationCool stream, mild tinglingTapping, vibration, sometimes sensitivity
Who it suitsStaining from coffee, tea, tobaccoCalculus, gum inflammation, periodontitis
LimitationsDoes not remove hard calculusDoes not always reach pigment in fissures
CombinationOften performed after scalingOften performed before air polishing

What tasks each method addresses

  • Pigment removal: coffee, tea, wine and tobacco leave persistent stains on the enamel, and the powder stream removes them from smooth surfaces and from fissures.
  • Cleaning hard-to-reach areas: around braces, crowns, implants and in interdental spaces a scaler is awkward to use, while the powder stream reaches where a brush and floss cannot.
  • Calculus removal: ultrasound chips away mineralized deposits above and below the gum line, and without it dense calculus cannot be removed — the powder simply glides over it.
  • Preparation for treatment: before fillings, prosthetic work or implant placement the surface is cleaned of biofilm so that the material bonds to clean enamel.
  • Gum support: with bleeding and early inflammation the dentist removes plaque and calculus, then monitors how the gums respond to hygiene.
  • Brightening the shade: the plaque is removed, but the colour of the enamel itself does not change — this is what distinguishes the procedure from whitening.

Why the methods complement each other

Neither method handles the whole task on its own. Ultrasound removes calculus but leaves a rough surface and does not clean pigment out of the grooves. The powder stream polishes the enamel and removes plaque, but it does not work on dense deposits. That is why they are often combined at an appointment: first the scaler is used on the calculus, then the teeth are treated with powder. This sequence produces a smooth surface to which plaque sticks less. Sometimes only one method is enough. If there is no calculus but there is coffee pigmentation, the doctor may limit treatment to powder. If the gums are inflamed and there is calculus beneath them, they start with ultrasound and postpone the powder. The decision depends on the clinical picture: the depth of periodontal pockets, the amount of deposits, and the condition of the enamel. What exactly is needed in your case is determined by the doctor after examination, not by a procedure chosen in advance.

What the patient feels during the procedure

The powder spray feels like a cool stream with a slight tingling sensation. On exposed necks and along the gum line, there can be sensitivity, but it is short-lived. Ultrasound feels different: a tapping, vibration, sometimes radiating into the tooth. On the lower incisors and in the canine area, sensations are usually more noticeable than on the molars. If sensitivity is high, the dentist changes the powder grain size, reduces the pressure, or takes a break. Anesthesia is rarely needed, more often for deep cleaning under the gum. After the procedure, a slight roughness may remain, which is removed by polishing. Bleeding gums in the first few hours is normal if there was tartar and inflammation. How long the visit takes depends on the amount of work: one patient has little plaque, another's cleaning takes longer. The dentist will give a more precise estimate after the examination.

Is the method harmful to enamel and gums?

The discussion about harm begins with concerns for enamel and gums. Let's look at what happens to the tissues during treatment and what the outcome depends on.

How the powder affects hard tissues

The powder for the device is a fine fraction of salt or sodium bicarbonate. Particles fly in a stream of water and air under pressure and knock soft plaque off the surface. Hard tissues are not abraded: the abrasive acts on deposits, not on enamel. Enamel is the densest tissue in the body, and brief contact with particles does not leave grooves on it. A different matter is demineralized areas, where the top layer is already thinned. There, the pressure and angle of the nozzle are chosen more carefully, otherwise sensitivity can be increased. The dentist examines the surface condition before starting work. If white spots, exposed necks, or cracks are visible, the mode is changed or another cleaning method is chosen. The powder itself does not destroy healthy enamel, but it cannot be called indifferent to its condition either. Much is decided not by the material, but by how it is used.

When the procedure is not indicated

  • Acute inflammation: with bleeding gingivitis and swollen gums the treatment will increase irritation; the inflammation is first brought under control, then hygiene is resumed.
  • Open defects: cavities, chips and cracks in the enamel are a direct contraindication — the powder enters the defect and causes pain.
  • Recent procedures: after tooth extraction, implant placement or bone grafting time is needed for healing, otherwise the stream injures the area.
  • Respiratory conditions: asthma in exacerbation, chronic lung disease — the aerosol of particles and water creates an unnecessary load.
  • Kidney and heart problems: in certain conditions the volume of saline solution entering the oral cavity is limited.
  • Removable and fixed appliances: braces, bridges and crowns themselves are not a problem, but their attachments and edges require careful handling.
  • Oral infections: herpes, stomatitis, purulent processes — treat first, clean later.

Gum reaction to the treatment

The gums react not to the powder, but to the pressure of the stream and to the very fact of plaque removal. If the tissue is inflamed, short-term bleeding is possible after the procedure. This is not a complication, but a sign that the irritated gum has been freed from the bacterial film. Within a few days, the condition usually improves, but the timing depends on the clinical picture. In people with a thin gum biotype, with recession and exposed necks, the treatment requires a special mode: the pressure is reduced, the nozzle is held farther from the edge. Sometimes ultrasound or hand instruments are chosen instead of the powder spray. Healthy gums tolerate the procedure calmly. Redness, if any, does not last long. Increased sensitivity to cold and hot is more bothersome, and here remineralizing therapy prescribed by the dentist helps. Irreversible changes in tissues do not occur with correct technique.

What Depends on the Clinical Picture

The same device behaves differently in two patients. In a person with dense enamel and healthy gums, the procedure passes without consequences. In another — with many fillings, crowns, exposed necks — an individual mode selection is required. Enamel thickness, marginal periodontal condition, the number of restorations, and hygiene habits matter. A smoker with dense plaque needs a more thorough approach than a person with a thin layer of soft plaque. The dentist assesses all this during the examination and, if necessary, uses imaging. Cone-beam computed tomography and an intraoral scanner provide additional information about the condition of tissues and restorations. The decision on the method, number of passes, and pressure is made by the dentist, not by a template. Therefore, comparing the sensations of two people is pointless: each has their own starting point.

Comparison of risks by condition

ConditionRisk during treatmentWhat the dentist does
Healthy enamelLowStandard setting
DemineralizationModerateReduces pressure, adds remineralization
Exposed necksModerateAvoids the area, changes the tip
Gum recessionIncreasedChooses a different method
Fillings and crownsDepends on the marginChecks the seal before treatment
Acute gingivitisHighResolves the inflammation first
ImplantsDepends on timingWaits for tissue healing

Does the procedure whiten teeth and to what extent?

Do not expect several shades of lightening from this procedure. It solves a different task, and it should not be confused with whitening.

What happens to the pigment

Pigment on the enamel exists in two states. Part of the plaque and soft deposits sits on the surface and is removed mechanically. The other part consists of coloring substances that have penetrated the upper layers of the enamel and the interdental spaces. The powder with air and water blasts away precisely the surface layer. It acts as a mild abrasive, not as a chemical agent. The pigment molecules inside the enamel remain untouched. Therefore, the color changes by removing what was on top, not by lightening the hard layer itself. If a person smokes or frequently drinks coffee, the plaque returns, and the shade again shifts toward the dark side. The procedure removes what has accumulated but does not recolor the enamel from within. The boundary between plaque removal and whitening lies here.

Restoring the natural shade and whitening

When the layer of pigment comes off the enamel, its own color shows through. It was always that way, it was just covered by a film of plaque. This is the main visible effect: the tooth looks lighter because it has become clean, not because it has been lightened. The difference is fundamental. The natural shade is unique to each person, and restoring it is not the same as making teeth whiter than the original. If the enamel is naturally yellowish or grayish, after the procedure it will remain the same in tone, only without plaque. One should not expect the color to jump several steps up the scale. Lightening beyond the natural shade is already the task of whitening, and it is achieved by other means. Patients often confuse these two results and then wonder why their teeth did not become snow-white.

What the visible result depends on

  • Natural enamel color: some people have naturally light enamel, others have a yellowish tone, and the procedure only reveals what lies beneath the plaque.
  • Thickness and density of the plaque: the longer it has accumulated, the more noticeable the difference will be before and after removal.
  • Habits: smoking, coffee, tea, red wine, and sauces quickly restore pigment to the cleaned surface, so the effect does not last long.
  • Gum condition: with inflammation and bleeding, treating the area near the gum line is more difficult, and some plaque remains (the dentist assesses this based on the clinical picture).
  • Individual characteristics: for one person plaque is removed easily, for another it clings more tightly, and this cannot be predicted in advance.

Why the durability of the shade is individual

How long the result lasts depends on the clinical picture and on the person themselves. For one person, plaque returns within a couple of months; for another, it lasts longer. This is not a property of the method but a feature of saliva, plaque composition, and daily habits. Some drink coffee three times a day, others once a week, and the difference will be visible. Smoking noticeably accelerates darkening. Home care also matters: brush, toothpaste, dental floss, interdental brushes. If you brush your teeth irregularly, pigment settles on the enamel again, and the shade fades. There are no exact timeframes here, and no one will promise them. The doctor can give a guideline for a specific case, but ultimately everything is decided by how the person cares for their oral cavity between visits.

Comparison with in-office whitening

ParameterPowder polishingIn-office whitening
What it removesSurface pigment and plaquePigment inside the enamel
Does it change colorRestores the natural shadeLightens beyond the original shade
Active agentAbrasive, air, waterChemical gel
SensationsDepends on sensitivityDepends on sensitivity
DurabilityIndividual, depends on habitsIndividual, depends on habits
Who it suitsThose who have plaqueThose who need a different shade

What equipment is used for the procedure

The air-abrasive unit is simpler than it seems. But the details determine how the powder lands on the enamel and what the patient feels.

Device design and handpieces

The system is pneumatic. The body holds a powder reservoir, with air and water supplied to it. The mixture travels through a hose to the handpiece, and the jet is formed there. The handpiece is a replaceable part. In some models it is metal and reusable; in others, plastic and disposable. The angle of the tube also varies: straight delivery is convenient on molars, angled — in the anterior region and along the gingival margin. A ring at the tip limits the depth of insertion so the jet does not go under the gum. Inside the reservoir, the powder lies loose: if it has compacted, the delivery comes in bursts. Before use, the device is blown through and checked for a clogged channel. Handpieces are processed according to sterilization rules, like any instrument contacting the mucosa. A separate detail is the nozzle. Its diameter sets the width of the spot: a narrow one hits pointwise, a wide one diffuses the jet. This affects how the doctor directs the flow to a specific tooth.

Types of powders and their purpose

  • Sodium bicarbonate: the particles are large and hard and remove dense pigment and plaque well, but they are not suitable for enamel near the gums or for exposed tooth necks — the abrasive is too coarse.
  • Glycine: a soft powder with rounded grains, used for sensitive teeth, for work near the gum margin, and for orthodontic appliances.
  • Erythritol: the grain is finer than glycine, free-flowing, and less likely to clog the nozzle; it is used where delicate treatment and a steady, non-pulsating flow are needed.
  • Mixtures with additives: flavorings or antimicrobial components are added to the powder; this has almost no effect on abrasive properties, but it changes the taste and smell in the mouth.
  • Different particle sizes: the same composition can come in a fine and a coarse fraction; the dentist matches the choice of fraction to the thickness of the plaque and the condition of the enamel.

Mixture delivery settings

The unit has regulators for air pressure and powder flow, plus a separate water flow control. Pressure determines the force of the stream. A low setting removes soft plaque, while a high setting reaches dense deposits but puts more pressure on the gum. The powder flow determines how much abrasive is delivered per second: a thicker mixture works faster, a thinner one is gentler. Water is needed so the powder doesn't create dust and doesn't dry out the mucosa; its flow is also adjustable. The ratio of air, water, and powder is selected for each area. On the front teeth and along the gum line, the stream is kept weaker. On the molars, where the enamel is thicker, it can be increased. The distance from the nozzle to the tooth is also a setting, but a manual one: close up it works precisely, farther away it disperses. The angle of the stream is adjusted to work around fillings and crowns. All of this is set before treatment begins and adjusted as you go. There is no universal regulator position: the device is tuned to a specific mouth, not to average numbers from the manual.

How models from different manufacturers differ

The differences start with the type of drive. There are pneumatic units, where compressed air propels the mixture, and models with a separate water heating channel. The latter option is more comfortable for sensitive teeth but requires a power connection. Reservoirs can be removable or built-in: a removable one is easier to rinse between patients. Some units combine cleaning and polishing functions, switching between powder and paste. There are handpieces with a rotating nozzle — the stream travels in an arc rather than a straight line. On some models, adjustment is on the foot pedal; on others, on the body. A separate category is units that work with only one type of powder; others accept any particle size. The manufacturer also determines consumption: some use less powder per procedure, others more. This affects the result indirectly, but the dentist's convenience directly. What is actually in the operatory depends on the clinic and its equipment. It doesn't affect the choice of method: that is determined by the clinical picture.

What the dentist decides when choosing a mode

First, they assess what needs to be removed. Soft plaque comes off with gentle settings; dense pigment requires higher pressure and a coarser grain. Then they look at the enamel: thin enamel, cracks, or exposed necks are a reason to use glycine and reduce the pressure. The condition of the gums also counts. If the margin bleeds, the stream is directed more carefully and the nozzle is not brought too close. Restorations get in the way: composite and ceramic must not be treated with coarse powder, or the surface will dull. Braces, implants, crowns — each element dictates its own limitations. Sensitivity is considered separately: for some people, cold air alone is unpleasant, so the water flow is adjusted. All of these are clinical decisions, not switches with ready-made labels. There is no universal mode that suits everyone. Settings are chosen based on the clinical picture, and the final word rests with the dentist.

What to remember

The essence of the method

The method combines a water-air stream with a fine abrasive. The mixture removes soft plaque and pigment from the tooth surface and from between the teeth. It works through the kinetic energy of the particles, not through heat or acid. Hard calculus cannot be removed with this stream. It is removed with an ultrasonic scaler, and the abrasive treatment is performed afterward — as a finishing step. Hence the main point: this is not a replacement for ultrasound, but a complement to it. If a person expects one procedure to solve everything, that expectation will not be met. The dentist looks at the condition of the oral cavity and decides whether abrasive treatment is needed at all during a given visit. Sometimes ultrasonic scaling and polishing with paste are enough. Sometimes the stream is appropriate. The difference between these options is determined by the clinical picture, not by the patient's wishes.

Limits of what it can do

The jet does not whiten. It restores the tooth's natural color by removing the layer of pigment. If the enamel itself is dark, the color will remain the same after treatment. It also does not remove calculus that is tightly bonded to the enamel — especially in the subgingival area. It does not reach deep periodontal pockets. It does not treat gum inflammation if it has already started. In cases of exposed necks, thin enamel, multiple restorations, and implants in the treatment area, the decision is made by the doctor: the jet may not be indicated or is used with limitations. Bleeding, sensitivity, and the condition of the marginal periodontium all influence the choice of tip, powder, and delivery mode. Fissures deserve special mention: there the plaque lies more densely, and it cannot always be removed in a single pass. There is no universal scenario for everyone.

The decision remains with the doctor

The patient cannot determine on their own whether they need abrasive treatment. This also cannot be decided from photos and descriptions on the internet. An examination is needed: the doctor assesses the amount of plaque, the condition of the gums, the depth of pockets, and the quality of restorations. Sometimes an image is taken before the procedure. Cone-beam computed tomography and the 3Shape intraoral scanner provide a three-dimensional picture, and a microscope with 25× magnification helps examine the marginal areas and the gingival margin. The laser is used where it is appropriate for the clinical situation. All instruments are sterilized in class B autoclaves. This is the standard, not an advantage. The choice of method — ultrasound, jet, hand instruments, or a combination — remains with the doctor and depends on what they see during the appointment.

Questions about Air Flow

The Airflow cleaning price depends on the amount of plaque, the number of teeth, whether ultrasonic scaling and polishing are needed, and whether remineralization is included in the procedure. Subgingival treatment or work with braces may be charged separately, because they take more time and consumables. The final cost is quoted by the doctor during the examination after seeing the condition of the oral cavity; current figures can be found in the prices section on the page. The initial examination and treatment plan at our clinic are 0 ₸, so you can find out your total before the procedure begins.

The price of Air Flow cleaning differs from patient to patient because the procedure is almost always combined: first hard tartar is removed with ultrasound, then the teeth are polished with powder, and sometimes fluoridation is added. The more pigmentation from coffee and tobacco and the denser the plaque, the longer the work and the higher the powder consumption. The condition of the gums also affects the price: if there is bleeding, the doctor may prescribe additional treatment or medicated applications. The exact amount is given by the doctor during the examination, and you can see current prices in the price section on the page.

The price of Air Flow cleaning consists of the doctor's work, consumables, the time for the procedure, and related stages such as polishing and remineralization. It is justified because soft plaque and pigmentation are removed faster and more gently than with regular mechanical cleaning, and the enamel is less traumatized. If only powder treatment is done, without ultrasound, the cost will be lower, but if there is tartar, this is not enough. The amount is given by the doctor during the examination, and the figures are collected in the price section on the page.

Air Flow whitening is not the same thing: Air Flow removes plaque and restores the teeth's natural color, but does not change its shade, while whitening lightens the enamel itself with a chemical composition. Sometimes after cleaning it seems that the teeth have become whiter because the dark film from coffee or tobacco is gone, but this is the effect of cleansing, not lightening. If a different shade is specifically needed, the doctor selects a separate method and assesses the condition of the enamel. Cleaning is often done before whitening as a preparatory stage.

Yes, you can book by phone or through the form on the website, as well as when visiting the clinic. We work daily from 9:00 to 20:00, parking is free, and the initial examination and treatment plan are 0 ₸, so before the procedure the doctor will assess the condition of the oral cavity. If you are planning cleaning before braces or implantation, mention this when booking so that the administrator allocates more time. Airflow teeth cleaning is performed by general dentists, and if necessary an orthodontist or surgeon is involved.

Air Flow whitening does not replace professional lightening: cleaning removes plaque and restores the natural color, but does not penetrate deep into the enamel and does not change its pigment. If the teeth have darkened from the inside — for example, after taking antibiotics or an injury — a separate method is needed, which the doctor selects. Sometimes after cleaning the shade seems lighter by one or two tones, but this is the effect of cleansing, not whitening. For lasting lightening, hygiene is first performed, and then the lightening procedure.

Air Flow is a method of removing soft plaque and pigmentation from the surface of the teeth with a stream of water, air, and fine powder. The procedure takes about half an hour, is performed without drilling, and usually does not require anesthesia, since the pressure of the stream is selected individually. Unlike ultrasound, this cleaning works with soft and stained deposits, not hard tartar, so it often complements it rather than replaces it. If the plaque is dense, the doctor first removes the tartar with ultrasound, and then polishes the enamel with powder.

It is indicated for pigmentation from coffee, tea, tobacco, for soft plaque, and before placing braces or veneers. There are also limitations: acute gum inflammation, herpes on the lips, open wounds in the oral cavity, severe bronchial asthma, and allergy to the components of the powder. The procedure is performed with caution in cases of thin enamel and exposed tooth necks — there the pressure of the stream is reduced. The final decision is made by the doctor after the examination, because contraindications are assessed individually, not by a general list.

Yes, the procedure is performed on both children and pregnant women, but with adjustments for age and trimester. For children, cleaning is usually done from age 6–7, when the child can comfortably tolerate the spray and sit with their mouth open; a pediatric dentist uses gentler pressure and powder volume. For pregnant women, cleaning is most often scheduled in the second trimester, because gum sensitivity and general discomfort are increased in the first and third. If there is morning sickness or a risk of miscarriage, the procedure is postponed until consultation with an obstetrician-gynecologist.

For prevention — once every 6 months, and with heavy smoking, coffee, or braces, the doctor may recommend once every 3–4 months. More often without indications is not advisable: the powder affects the enamel surface, and too frequent procedures increase sensitivity. If a reaction to cold or hot appears, the interval is extended, and the enamel is strengthened with remineralizing agents. It is best to agree on a specific schedule with the doctor who can see the condition of the gums and enamel thickness.

We are open daily from 9:00 AM to 8:00 PM, no days off. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. Phone for appointments: +7 747 093 89 86. Initial examination and treatment plan: 0 ₸.

Address: Almaty, 133/6 Kanyš Satpaev Street, JAZZ residential complex. Free parking for patients. Phone for appointments: +7 747 093 89 86. We are open daily from 9:00 AM to 8:00 PM.

Warranty up to 5 years. The clinic has been operating since 1995, with a rating of 4.9 based on 312 reviews on 2GIS, Google and Yandex. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM.

Installment plan for 24 months with Jusan bank or 12 months with Kaspi. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Initial examination and treatment plan: 0 ₸. There is no separate fee for the first visit. Warranty up to 5 years. Installment plan for 24 months with Jusan bank or 12 months with Kaspi.

Parking is free. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Air Flow reviews

4,9
30 reviews on the site
30 ratings
ДДенис В.8 September 2026
★ 4,0

Gigiena raz v polgoda, v etot raz dobavili ftorirovanie, zaodno proverili plomby — tut otdelnaya istoriya —, a oschuschenie chistoty derzhitsya do sih por, pridratsya ne k chemu.

ВВладимир П.2 September 2026
★ 5,0

Booked on the advice of a colleague from work. In short: good. I came on a colleague's recommendation. Dana laid out the plan in detail. Hygiene every six months; this time fluoride treatment was added.

ООльга А.24 August 2026
★ 5,0

Farrukh told me right away what to expect. I came in for a hygiene appointment, they removed the tartar and plaque, and showed me what to use to clean between my teeth — and that was exactly what I was afraid of —)

ААртём Г.23 June 2026
★ 5,0

Before this, I had only come in for promotional offers and never really got proper treatment. Rustam told me right away what to expect. I had a professional cleaning done, and they recommended a toothpaste.

ММеруерт Е.28 May 2026
★ 5,0

The color came back to normal, without any whitening, nothing to complain about, cleaning with ultrasound and polishing, finished within an hour. I came on my sister's recommendation. Thanks to the whole team. Sterility is visible, instruments were opened in front of me, as agreed. The hallway doesn't smell like a hospital, but something neutral. It was important to me that everything was explained in advance — and it was. They messaged me the next day to ask how I was feeling, as agreed. The office is bright, the equipment is new — a small thing, but nice.

ДДенис К.27 May 2026
★ 5,0

Sanjar explains things calmly and to the point — I would come back here with my second tooth too. Ultrasonic cleaning and polishing, done within an hour. Just like that. The color returned to its own, without any whitening, nothing to complain about (I couldn't believe it myself))

The clinic administrator answers patient messages at the front desk
Still have questions

Still have questions about Air Flow teeth cleaning?

Message us on WhatsApp or give us a call — the clinic is open daily from 9:00 to 20:00. Initial examination and treatment plan — 0 ₸, free parking.

free parking133/6 Kanysha Satpayevaopen daily, no days off9:00 — 20:00Jusan bank — 24 months, Kaspi — 120% installment plan
Calculate the cost