+7 747 093 89 86Daily 9:00–20:00Book a visit
Prosthetics and Aesthetics

Implant-supported prosthetics in Almaty: types of dentures, stages, and what determines the price

An implant-supported denture rests not on the gums but on artificial roots. The restoration can be removable or fixed, and the number of supports depends on the clinical picture. The dentist determines the lifespan and maintenance. The decision is made after an examination and imaging.

Answer a few questions in the calculator below — and our administrator will send you an estimate for your case before your visit.

30+years treating patients in Almaty
up to 5 yearswarranty on work
0%Installments: Alatau City Bank — 24 months, Kaspi — 12

How much does implant-supported prosthetics cost in Almaty

Full price list
TreatmentDuration & warrantyPrice
Removable denture per jaw3–4 visitsCast partial or acrylicfrom65 000 ₸Message on WhatsApp
All-on-4/6 denture per jaw3–5 daysFixed, implant-supportedfrom1 800 000 ₸Message on WhatsApp
All-on-4, implant placement on one jawfrom800 000 ₸Message on WhatsApp
Permanent denture on four implantsfrom1 000 000 ₸Message on WhatsApp
Porcelain-fused-to-metal crown on implantfrom80 000 ₸Message on WhatsApp
Initial prosthodontic consultation0 ₸Message on WhatsApp
Removable denturesfrom65 000 ₸Message on WhatsApp
Crownfrom67 000 ₸Message on WhatsApp
E-max veneerfrom182 000 ₸Message on WhatsApp
Consultation and wax-upfrom10 000 ₸Message on WhatsApp

What determines the price of an implant-supported denture

The cost of implant-supported prosthetics consists of several components: the number of supports, the type of restoration, the material of the crowns or the arch, and the scope of preparatory procedures. The work of the prosthodontist and the dental laboratory is calculated separately. The exact amount is given after an examination and imaging, because each patient's plan is individual. You can schedule a consultation by calling the clinic.

By design

What types of implant-supported dentures exist

Different designs cover different numbers of missing teeth and are fixed in different ways — this helps you understand which option to discuss with the prosthodontist.

Instruments and materials for this type of treatment, laid out on a light surface — an illustration for the section "Removable, conditionally removable, and fixed restorations"

Single crown on an implant

The restoration replaces a single missing tooth. The crown is fixed to the implant via an abutment, and the adjacent teeth are not prepared. The crown material is selected to match the color and translucency of the neighboring teeth. This option is used when the adjacent teeth are intact and do not require preparation.

Chairside care: dentist at work, over-the-shoulder view of the assistant — illustration for the "Materials for Prosthetics" section

Bridge on several implants

A bridge restoration rests on two or more implants and replaces a group of missing teeth. The intermediate part of the bridge does not touch the gums, which allows hygiene underneath. The number of supports is determined by the prosthodontist based on the CT scan and the distribution of chewing load.

A jaw model and material samples on the dentist's table next to a mirror and probe — an illustration for the section "Differences from conventional prosthetics"

Conditionally removable implant-supported denture

The arch is fixed to the implants with screws or attachment fittings and is removed by the dentist at maintenance visits. The patient uses the restoration as a fixed one, but it can be removed for servicing if necessary. This option is used when a significant number of teeth are missing.

The doctor shows the patient the scan on the screen and explains the treatment plan — an illustration for the section "Removable implant-supported denture"

Removable denture fixed on implants

A complete removable denture is retained on implants using ball or bar attachments. The patient removes it themselves for hygiene. Compared to a conventional removable denture, this restoration holds better during speech and eating. The indications are determined by the prosthodontist after an examination.

A treatment room prepared for an appointment: dental chair, lamp, and instrument tray — illustration for the section "Bar and telescopic attachment systems"

Bar and telescopic retention systems

A bar connects several implants into a single support, and the denture fits onto it. The telescopic system uses crowns that fit into one another. The choice of retention depends on the number of supports, the shape of the jaw, and the condition of the mucosa. Both systems are serviced at maintenance visits.

Stages of implant-supported prosthetics

Consultation: doctor and patient at a screen with an X-ray — illustration for the section "Can it be done in one visit?"
Step 01

Consultation and treatment plan

At the first visit, the dentist examines the oral cavity, clarifies the complaints, and takes the medical history. The initial examination and treatment plan are 0 ₸. The patient is explained which restoration options are possible in their situation, and a preliminary estimate is drawn up by stages.

Preparation: the assistant lays out sterile instruments, the dentist puts on gloves — illustration for the "Planning and Examination" section
Step 02

Examination before prosthetics

Before treatment, a cone beam CT is performed to assess the volume of bone tissue and the location of anatomical structures. A 3Shape intraoral scanner takes a digital impression. Based on this data, the future restoration and the position of the supports are modeled.

The treatment stage itself: the doctor's gloved hands working in the oral cavity — an illustration for the section "Taking impressions and fitting"
Step 03

Surgical stage of implant placement

The implants are placed by an implant surgeon according to a pre-made plan. The surgery is performed under local anesthesia. After the supports are placed, follow-up visits are scheduled and healing times are given, during which preparation for the prosthetic stage takes place.

Follow-up visit: the dentist checks the result with a mirror while the assistant holds the saliva ejector — illustration for the section "Fabrication and cementation"
Step 04

Impression taking and fabrication of the restoration

When the tissues are ready for loading, the prosthodontist takes impressions — with a digital scanner or using a tray and impression material. Based on them, the framework and veneering of the denture are made in the laboratory. At the try-in, the fit and occlusion are checked.

End of appointment: the doctor beside the patient goes over aftercare instructions — illustration for the "Follow-up examinations" section
Step 05

Fixation of the implant-supported denture

The finished restoration is placed on the supports and fixed with screws or cement. The dentist checks the contacts with the opposing teeth and adjusts if necessary. The patient is shown how to care for the restoration and which products to use at home.

Consultation: doctor and patient at a screen with an X-ray — illustration for the section "Follow-up checkups after prosthetics"
Step 06

Follow-up visits after prosthetics

At agreed intervals, the patient comes in for a check-up: the doctor examines the condition of the implants, the attachments, and the soft tissue around the prosthesis. Professional hygiene and occlusion adjustment are performed if needed. Regular visits help detect changes in the structure in time.

Our Doctors

Who provides this treatment

The clinic's doctors who see patients for this service. A treatment plan is drawn up after the examination.

Price calculator

Find out the cost of Implant-supported prosthetics in 20 seconds

Step 1 / 5
What bothers you the most?
How long ago did you notice this situation?
Have you had any treatment done on these teeth before?
How would you prefer to pay?
One last step

Leave your contact details and we'll send the estimate and suggest a convenient time.

Request received

Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.

Zhumabekov Nurlan Asylbekuly — dentist at Dental-Center dental clinic in Almaty, portrait in work uniformThe estimate is reviewed by the clinic's prosthodontistTakes 20 seconds — you'll get a reply from our administrator during business hours
Estimate based on the clinic's 2026 price listExamination and treatment plan — 0 ₸0% installments: Alatau City Bank — 24 months, Kaspi — 12

How does the prosthesis stay on the artificial root?

The implant is placed into the bone and serves as a support. The prosthesis itself is not screwed directly onto it. There is an intermediate component between them — the abutment.

The role of the abutment in the connection

The abutment is the connector between the implant and the crown. Its lower part fits into the implant, and the upper part replicates the shape of the tooth stump. Through it, chewing load is transferred to the artificial root and then to the bone. Abutments can be standard or custom. A standard one is taken from a kit and is cheaper. A custom one is milled from an impression or scan and more precisely follows the gum contour. The choice depends on the clinical situation: gum thickness, implant angulation, and the position of adjacent teeth. The dentist decides. The abutment also sets the direction in which the crown emerges from the gum. If the angle is incorrect, the prosthesis will look unnatural, and cleaning it will become more difficult. A removable implant-supported restoration is also attached through abutments — only of a different type, for attachments or a bar.

Types of fixation: screw-retained and cement-retained

MethodHow it worksWhen it is chosen
Screw-retainedThe crown is screwed in with a screw through an opening on the chewing surfaceWhen access to the implant is needed
Cement-retainedThe crown is cemented onto the abutmentWhen aesthetics matter more and there is no access
CombinedAbutment with a screw, crown cementedFor a complex implant angle
BarThe supports are connected by a bar, and the prosthesis sits on itFor complete absence of teeth
Locator attachmentMatrices are in the prosthesis, patrices are on the implantsFor removable restorations

What affects the fit

  • Impression accuracy: the impression or scan conveys the position of the implant in the bone. An error of tenths of a millimeter creates a gap where plaque accumulates.
  • Abutment quality: a stock component seats with a microgap. A custom one follows the gingival contour and seals the junction more tightly.
  • Implant position: angulation, depth of placement, gingival thickness. With thin gums, the crown margin is visible; with thick gums, it goes beneath them.
  • Crown material: zirconia and metal-ceramic behave differently under load. For full-arch restorations, zirconia is often chosen because of its strength.
  • Hygiene: plaque around the abutment is removed with an interdental brush and a single-tuft brush. Otherwise the gums become inflamed and the fit is compromised.

Removable vs. fixed restoration: what is the difference

The difference is not in the crown material, but in whether the prosthesis is rigidly supported by the implants or can be removed by the patient. This also leads to different requirements for the number of supports, hygiene, and repairs.

How the patient removes and inserts the restoration

A removable implant-supported prosthesis is held in place by attachments or a bar. In the morning it is put in place, and in the evening it is removed and cleaned separately from the oral cavity. The attachment secures the restoration, but not rigidly: it may move slightly during chewing. The patient decides when to take it out. A fixed restoration is secured to the supports with screws or cement. Only the dentist can remove it in the office. Such a restoration is cleaned in the mouth: with an interdental brush under the bar, an oral irrigator, and a single-tuft brush. If plaque accumulates between the gum and the prosthesis, inflammation begins unnoticed. The removable option is easier to clean, but more often requires tightening of the attachments. The fixed one does not move during chewing, but requires daily attention. What to choose is decided by the dentist based on the clinical situation, not by the patient's preference. The cost of implant-supported dentures is calculated differently for each type: removable and fixed restorations have their own set of procedures and components.

Comparison by key features

FeatureRemovableFixed
SupportAttachments, barAbutments, screws
RemovalBy the patientBy the dentist only
HygieneOutside the mouthIn the mouth, daily
Movement while chewingSlight movement possibleNone
RepairMore often, attachment tighteningLess often, removal by the dentist
Size of the restorationRemovable segmentCrowns, bridge, bar

When each option is chosen

  • Few supports: with two or three implants, a long-span fixed bridge is not placed, whereas a removable restoration distributes the load differently.
  • Bone atrophy: when there is little bone tissue and grafting is not planned, a removable implant-supported denture closes the defect without a large number of supports.
  • Complete absence of teeth: a fixed restoration is made on four or more implants, a removable one on two, and the dentist decides based on the CT scan.
  • Hygiene and manual dexterity: it is difficult for an elderly patient with arthritis to clean a fixed prosthesis in the mouth; a removable one can be taken out and cleaned separately.
  • Aesthetics and speech: a fixed restoration does not shift when speaking, while a removable one may require getting used to the bulk of the base.
  • Budget and staging: the removable option is often chosen as an interim solution to be replaced later with a fixed one.

How many supports are needed per jaw?

The number of supports for a prosthesis is not arbitrary. It is determined by the anatomy of the jaw and the type of restoration, and the decision is made by the dentist based on imaging.

What determines the number of supports

The cost of a prosthesis consists of several parts, and not all of them depend on the clinic. The number of supports is one of them, but not the only one. Crown material, type of fixation, and the amount of preliminary preparation all change the final amount. Below is what exactly affects the price.

Guidelines for the number

Type of restorationGuideline for supportsWhat is taken into account
Removable denture2–4 supportsJaw shape, bone volume
Conditionally removable4–6 supportsLoad, bite
Fixed bridge6–8 supportsLength of the defect
Full arch8–12 supportsBone density, nerve zones

Why the exact number cannot be given in advance

  • Individual anatomy: bone thickness and density vary from person to person, and a single scan cannot predict where a support will hold reliably and where bone grafting will be needed.
  • Condition of adjacent teeth: if natural teeth are nearby, they are sometimes incorporated into the structure, which changes the number of supports — the doctor decides this after examination.
  • Type of prosthesis: removable, conditionally removable, and fixed structures require different numbers of support points, and the choice depends on the clinical picture.
  • Load distribution: even with the same number of supports, the placement pattern may differ so that chewing pressure is distributed evenly and does not overload individual areas.
  • Staged treatment: sometimes supports are placed in two stages, and the final number becomes clear after the first implants heal.

Two-support restoration: when is it chosen?

A prosthesis on two implants is a fixed or conditionally removable restoration that is secured to a pair of artificial roots. The decision is made based on the clinical situation, not on preference.

Design and principle of operation

Two implants are placed into the jawbone at selected positions. Abutments are attached to them, and on top goes a crown, bridge, or bar with a prosthesis. Chewing load is transmitted through the abutments into the bone tissue, so the prosthesis does not press on the gums the way a removable one does. The intermediate section of the bridge hangs above the gum and does not touch it. This scheme works if the abutments are stable and the load distribution is acceptable. The dentist assesses bone density, ridge width and height, and the condition of adjacent teeth. If tissue is insufficient, bone grafting may be needed first. The restoration can be fixed — then it is secured with cement or screws, and only the dentist can remove it. In the conditionally removable version, the patient removes it themselves for hygiene. Planning for such prostheses and the price are determined after examination and imaging. The exact scheme is decided by the prosthodontist together with the surgeon.

Indications for this approach

  • Single defect: one tooth is missing and the adjacent teeth are healthy — a bridge on two supports closes the gap without touching their enamel.
  • Terminal defect: the end teeth of the row are missing, and a conventional bridge on natural teeth cannot be built — a pair of implants holds the crown.
  • Small gap: two or three teeth in a row are missing, and the bone allows supports to be placed without extensive grafting and augmentation.
  • Refusal of removable: the patient does not want a removable structure, and the number of supports based on the clinical picture is limited to two, and the doctor decides this.
  • Preservation of adjacent teeth: the abutment teeth are not ground down for crowns, their enamel remains untouched, and this is an advantage for the future.
  • Conditionally removable option: a prosthesis is needed that the patient removes for hygiene, and a pair of supports allows this without loss of stability.

Limitations of the method

Two abutments are not always enough. If many teeth are missing in a row, the load on each abutment increases, and the restoration may not hold up. In such cases more implants are planned — exactly how many is decided by the dentist based on the CT scan. Geometry also matters: with significant bone deficiency, a pair of abutments will not be placed without prior grafting. Sometimes anatomy gets in the way — the proximity of the mandibular canal or the maxillary sinus. Then a different scheme or a different placement site is chosen. There are hygiene limitations: a fixed prosthesis on two abutments is harder to clean than a single crown. With inadequate care, the gum around the abutments becomes inflamed. The patient must be prepared for regular check-ups and professional cleanings. General health also plays a role: with uncontrolled diabetes, smoking, or blood disorders, the decision is made cautiously. The outcome depends on the clinical picture and the patient's discipline.

Care and how often to remove it

Home care for an implant-supported restoration differs from care for a conventional removable denture. Let's go over what to do daily and when the appliance is removed.

Daily hygiene

  • Brushing twice a day: use a soft brush on the inner and outer surfaces, avoiding the necks of the abutments, otherwise the gums around them become inflamed.
  • Area around the abutments: plaque accumulates here, so clean it separately — with a single-tuft brush or an interdental brush sized to fit the gap between the restoration and the gum.
  • Interdental spaces: pass dental floss or superfloss between the artificial teeth and the adjacent natural teeth; a regular brush does not clean these areas.
  • Water flosser: a stream of water rinses out food debris under the pontic; choose a gentle setting so as not to injure the mucosa around the abutments.
  • Removable part: remove it after meals and rinse under running water, and once a day clean it with denture paste, not regular toothpaste.
  • Inspection: once a week check whether the retaining elements have loosened and whether the restoration itself is mobile; if you find a problem, make an appointment with the dentist.

How often to remove a removable restoration

A removable implant-supported restoration is taken out after every meal to rinse it and clear food debris from under the base. It is also removed at night: the mucosa and gum around the abutments need to rest, and plaque does not accumulate in the attachments over eight hours. Wearing the appliance around the clock is not advisable, even if it fits well. How long the restoration stays in the mouth during the day depends on the clinical picture: with increased gum sensitivity or after adjustment, the dentist may recommend more frequent breaks. The removal schedule is determined not by budget but by the condition of the tissues and the type of fixation. Fixed versions, which are secured with screws or cement, are not removed at home at all: they are serviced by the dentist at a preventive visit. The exact removal schedule is given by the treating dentist after examination; there is no universal rule for everyone.

Cleaning products

  • Paste: for removable parts use a paste without abrasive particles; for natural teeth and gums use a regular one chosen according to sensitivity.
  • Cleaning tablets: dissolve in warm water and soak the restoration according to the instructions; boiling water and harsh solvents damage the plastic and the attachments.
  • Interdental brushes and single-tuft brush: choose them by the width of the gaps; they reach where a regular brush cannot.
  • Water flosser with a nozzle: helps rinse away plaque under the pontic, but set the pressure to minimum so as not to hit the gum.
  • Ultrasonic bath: suitable for a removable restoration if the dentist approves; metal parts and attachments are not damaged by it, and plaque is removed more gently.
  • What to avoid: hard brushes, whitening pastes with large particles, alcohol-based solutions and hot water — they accelerate wear of the material.

Service life and replacement

The durability of an implant-supported restoration is an estimated value, but not a constant one. Some patients wear it for years without adjustments, while others need rework sooner. Let's go over what affects wear and how to tell it's time for replacement.

What determines longevity

Durability is not down to a single factor. It depends on how the load is distributed, how the tissues around the abutments heal, and how often the patient comes in for check-ups. Below is what exactly determines how long the prosthesis will last.

Signs of wear

  • Mobility: the restoration has started to wobble when chewing or speaking — this is the first sign that the bond with the abutment has weakened and needs to be checked.
  • Gap at the gumline: a space has appeared between the edge of the crown and the gum tissue where food gets trapped; it will not close on its own, and plaque inside speeds up deterioration.
  • Chips and cracks: the veneering chips most often where the bite is uneven; a small chip can still be polished, but a large one requires remaking the restoration.
  • Worn chewing cusps: the contours of the crown flatten, chewing becomes less efficient, and the load is redistributed to the neighboring teeth.
  • Discoloration: darkening at the gumline or spots on the veneering indicate plaque buildup and that hygiene in that area is lacking.
  • Discomfort under the restoration: a feeling of pressure, itching, or pain in the gum is a reason to come in for an unscheduled exam rather than wait for the next visit.

When replacement is needed

Replacement is needed not according to the calendar, but according to the condition. If the facing has cracked and cannot be restored, if the framework has deformed or fractured, if the prosthesis no longer fits snugly on the abutments — it is replaced. Sometimes a reline or replacement of screws is enough, and then the structure continues to serve. Another scenario is bone loss around the implant: while the process is reversible, hygiene correction and monitoring help; when the abutment loses stability, the doctor decides whether it can be saved. A separate case is a change in bite or loss of an adjacent tooth: the old prosthesis no longer matches the new situation, and it is remade. The patient should remember a simple rule: a routine check-up every six months is easier than an emergency remake. During the appointment, the fit, condition of the gums, and fasteners are checked. If everything is in order, no intervention is needed. If not, the doctor names the scope of work and explains what can be repaired and what will have to be fabricated anew.

Equipment for prosthetics

The work of the prosthodontist relies on instruments. Some show what is happening in the bone, others transfer data to digital format, and still others fabricate the structure itself.

Diagnostics before work

  • Cone beam CT: produces a three-dimensional image of the jaw, used to assess bone density around the implant sites and the position of the mandibular canal, so that the implant plan is based on actual data rather than guesswork.
  • Microscope with 25× magnification: used during preparation and when working with soft tissues, when it is necessary to see the boundary between the gum and the tooth stump.
  • Intraoral scanner: takes a digital impression without a tray or impression material; the data is sent to the laboratory as a file.
  • Laser: used for soft tissue treatment and disinfection; the doctor decides based on the clinical picture, not a template.
  • Class B autoclaves: sterilize instruments and tips; without this, working with implants is impossible, and this is a requirement, not an option.

Equipment for fabrication

  • CAD/CAM milling machine: carves the framework of a crown or bridge from a zirconia or silica block based on the digital model.
  • 3D printer: prints working models of the jaw and guides, which are then used to check the fit so the stage doesn't have to be redone.
  • Articulator: reproduces the movements of the lower jaw so that the occlusion doesn't end up too high and the patient doesn't complain of discomfort.
  • Scanner for the finished restoration (example: checking the fit on the abutment): verifies how accurately the prosthesis seats on the abutment.
  • Ceramic firing furnace: sinters the veneering layer if the prosthesis is ceramic, and the color and strength of the coating depend on the firing cycle.

How equipment affects the result

The precision of instruments reduces the number of remakes, but does not override anatomy. The tomograph shows where there is enough bone and where there is not — this changes the plan, not just the size of the structure. The scanner eliminates impression error: the smoother the digital model, the tighter the framework fits on the abutment. The microscope helps avoid damaging adjacent tissues during preparation. But even with good technique, the outcome depends on the clinical picture: bone density, gum condition, hygiene. Equipment is a tool, not a replacement for the doctor's decision. In Almaty, such instruments are part of the equipment in clinics that work with implants, and this is the norm for prosthodontics. What exactly is needed in a specific case is determined by the doctor after examination and imaging. A separate note should be made about staff training: the device does not work by itself; it requires hands that know how to handle it. And about service: if a tomograph or milling machine is idle due to a breakdown, this shifts the stages, so equipment is maintained according to regulations, not after failure.

Difference from removable dentures without implants

The difference is not only whether the structure is removed or not. The very point of support changes: a removable denture has none, while implant-supported prosthetics have one.

Support and fixation

A removable denture rests on the gums. It is supported by the mucosa, not the bone, and is held in place by the anatomical features of the jaw, suction, or clasps. Chewing load is transferred to the underlying tissues, not to an artificial root. Implant-supported prosthetics work differently: pressure goes through the titanium root into the bone, as with a natural tooth. Hence the difference in fixation. A removable structure can be removed with the tongue or hand; it moves during speech and eating. Implant support holds the prosthesis rigidly, but this is not always possible: the volume of bone tissue, its density, and location determine how many supports can be placed. With pronounced bone atrophy, some methods are unavailable without additional interventions. The doctor assesses the clinical picture and offers an option that will withstand the load.

Comparison by features

  • Support point: a removable denture rests on the gum, while an implant-supported restoration transfers chewing pressure into the bone through the artificial root.
  • Fixation: the patient removes a removable restoration themselves, while an implant-supported prosthesis is attached to the supports and can only be removed by the dentist.
  • Chewing load: with a removable denture it is limited by the mucosa, while with an implant-supported restoration it is higher, but the outcome depends on the number of supports and the condition of the bone.
  • Feeling in the mouth: a removable denture takes up a lot of space and presses on the gum, while an implant-supported prosthesis is more compact but requires an adjustment period.
  • Care: a removable restoration is cleaned outside the mouth, while an implant-supported prosthesis requires routine hygiene plus interdental brushes around the attachments and supports.

What changes for the patient

  • Speech: a removable denture may shift when you talk, while an implant-supported restoration stays more stable, but diction depends on the bulk of the prosthesis itself.
  • Eating: with a removable denture you have to avoid hard foods, while with implant support there are fewer restrictions, but hard foods still require caution.
  • Appearance: a removable restoration can change the contours of the face and is noticeable when you smile, whereas an implant-supported denture looks closer to natural.
  • Adjustment: it takes weeks to get used to a removable denture, and also to an implant-supported restoration, but for different reasons: it is not the movement that bothers you, but the new sensations.
  • Maintenance: a removable denture needs periodic relining, while an implant-supported restoration requires checking the fit and the condition of the implants at checkups.

Key points

Key Points

An implant-supported denture rests not on the gums but on artificial roots. Hence the differences: the structure does not shift when speaking, does not press on the mucosa, and does not require adhesive. You can chew normal food, but the load is distributed according to the rules. Daily cleaning is needed, with interdental brushes and an oral irrigator. The removable version is taken out at night, the fixed one is not. The number of supports and the type of fixation are selected based on the clinical picture: sometimes two are enough, sometimes a custom scheme is needed. The service life depends on hygiene, bite, bone condition, and regular check-ups. Replacement or repair is possible, but their scope cannot be predicted in advance. The decision remains with the doctor after examination and imaging. The patient should understand in advance that the structure requires no less care than natural teeth, and sometimes more. And that the first year after placement usually involves follow-up visits: this is how tissue adaptation to the load is monitored.

What the doctor decides

The doctor looks not at a single tooth but at the whole picture. Bone volume, tissue density, bite, position of the antagonists, gum condition — all of this influences the choice. Using cone-beam CT scans, they assess where a support can be placed and where bone augmentation is needed first. The 3Shape scanner helps take a digital impression and model the structure without impression material. A microscope with 25× magnification is used where precision in a small field matters. Then the doctor decides: removable or fixed scheme, how many supports, what fixation. The patient receives a plan with stages and understands what happens at each step. If the case is complex, the plan may be revised along the way — this is normal, not a mistake. Sometimes the decision changes during surgery: what looked suitable on the scan may in reality require a different approach.

What to pay attention to

Hygiene is not a formality. Plaque around the support causes inflammation, and that hinders treatment. An interdental brush, a single-tuft brush, and an oral irrigator cover the areas a regular toothbrush cannot reach. Check-ups are needed regularly, even if nothing hurts: this is how problems are detected before they become noticeable. Habits like cracking nuts or opening packages with your teeth shorten the service life of any structure. Smoking and uncontrolled diabetes affect the tissues around the supports. If mobility, pain, or swelling appears, do not wait for a scheduled visit. And another thing: do not compare your case with someone else's. What worked for an acquaintance may not work for you — the doctor decides based on scans and examination. It is also worth telling the doctor honestly about medications you take: some drugs affect healing and the condition of the mucosa.

Questions about implant-supported dentures

The price of a removable implant-supported denture is made up of the cost of the implants, abutments, the prosthesis itself, and the doctors' work. The total is influenced by the number of implants, the prosthesis material, and the need for additional procedures such as bone grafting. The exact amount is given by the doctor at the consultation after diagnostics, and you can see general price ranges in the pricing section on this page. Installment plans are available for 24 months with Alatau City Bank or 12 months with Kaspi.

The cost of a fixed implant-supported denture depends on the number of implants, the type of crowns or bridge, and the complexity of the clinical case. The price includes implants, abutments, impressions, the prosthodontist's work, and follow-up visits. At the initial appointment, the doctor draws up a plan and gives the amount, and general price ranges are available in the pricing section on this page. Payment can be spread over an installment plan for 24 months with Alatau City Bank or 12 months with Kaspi.

The price of prosthetics on 4 implants is made up of the cost of four implants, a temporary and a permanent prosthesis, and the work of the surgeon and prosthodontist. Bone grafting or a sinus lift may also be needed, which affects the total amount. The exact cost is given by the doctor at the consultation after a CT scan, and you can see price examples in the pricing section on this page. Our clinic offers an installment plan for 24 months with Alatau City Bank or 12 months with Kaspi.

The cost of a removable denture on 2 implants includes two implants, abutments, attachments, and the denture itself, as well as the specialists' work. The price depends on the denture material and the type of fixation — for example, ball or bar attachments. The exact amount is given by the doctor at the consultation, and you can see general price ranges in the pricing section on this page. An installment plan is available for 24 months with Alatau City Bank or 12 months with Kaspi.

The cost of implant-supported prosthetics is made up of the price of the implants, abutments, the prosthesis itself, impressions, and the doctors' work. The need for bone grafting, a sinus lift, and temporary structures is also taken into account. The final amount is given by the doctor at the consultation after diagnostics, and general price ranges are available in the pricing section on this page. The initial consultation and treatment plan are free (0 ₸).

Implant-supported prosthetics is a method in which a dental prosthesis is fixed not to your own teeth or gums, but to artificial titanium implants placed in the bone. Such a structure can be removable or fixed and can restore a single tooth, several teeth, or a full arch. The implants distribute the chewing load and prevent bone atrophy. The treatment plan is drawn up by the doctor after a CT scan.

Yes, in some cases a temporary prosthesis is fixed on the very day the implants are placed — this is called immediate loading. It is possible when the implants have achieved sufficient stability in the bone and the patient has no significant bone deficiency or inflammation. The final prosthesis is placed later, after healing, so as not to overload the implants. The decision is made by the implant surgeon based on cone-beam CT data and bone density.

If an implant fails to integrate, it is removed and re-implantation is planned after the bone heals. This is a rare complication, but it requires attention: mobility, pain, swelling, or inflammation around the structure appear. The doctor assesses the condition using scans, provides treatment if necessary, and sets a date for the new surgery. It is important not to ignore the symptoms and to come in for a follow-up visit so as not to lose bone tissue.

Yes, our clinic offers a warranty on implant-supported prosthetics for up to 5 years. It covers the restoration and the dentist's work, provided you follow care recommendations and attend regular check-ups. To keep the warranty valid, you need to come in for preventive check-ups and maintain oral hygiene. The exact terms depend on the type of prosthesis and are specified in the contract.

Yes, if all teeth are missing, an implant-supported prosthesis is possible — it is one of the main ways to restore chewing function. Removable and fixed restorations supported by implants are used, and the number of supports is selected based on the anatomy and volume of bone tissue. If there is not enough bone, bone grafting may be needed first. The plan is developed by the implant surgeon together with the prosthodontist after a CT scan.

We are open daily from 9:00 AM to 8:00 PM, no days off. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. Phone for appointments: +7 747 093 89 86. Initial examination and treatment plan: 0 ₸.

Address: Almaty, 133/6 Kanyš Satpaev Street, JAZZ residential complex. Free parking for patients. Phone for appointments: +7 747 093 89 86. We are open daily from 9:00 AM to 8:00 PM.

Warranty up to 5 years. The clinic has been operating since 1995, with a rating of 4.9 based on 247 reviews on 2GIS, Google and Yandex. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM.

Installment plan for 24 months with Alatau City Bank or 12 months with Kaspi. Initial examination and treatment plan: 0 ₸. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Initial examination and treatment plan: 0 ₸. There is no separate fee for the first visit. Warranty up to 5 years. Installment plan for 24 months with Alatau City Bank or 12 months with Kaspi.

Parking is free. The clinic is in Almaty, at 133/6 Kanyš Satpaev Street, JAZZ residential complex. We are open daily from 9:00 AM to 8:00 PM. Phone for appointments: +7 747 093 89 86.

Reviews about implant-supported prostheses

4.9
27 reviews on the site
27 ratings
Google5.063 reviews2GIS4.996 reviewsYandex4.888 reviewsTotal4.9247 reviews
ВВладимир Г.7 September 2026
★ 5,0

The removable denture was rubbing, and I never managed to wear it. At first I was puzzled by the silence in the lobby — then I understood why. They placed an implant in the position of the six, and the crown was placed later)

ААйгуль Б.31 August 2026
★ 5,0

I spent a long time choosing a clinic and read reviews all over the city (I double-checked twice). . . It didn't hurt at all. They placed an implant in the spot of the sixth tooth, and no bone grafting was needed. They messaged me the next day to ask how I was feeling — a small thing, but it was nice.

ЮЮлия Р.9 July 2026
★ 5,0

I had two implants placed, both took, and at check-ups nothing was ever missing. I'm one of those people who asks again three times — they were patient (we laughed about it at home afterwards). I got used to it within a week and forgot it was there, and that's the main thing.

ЖЖанар Е.26 June 2026
★ 5,0

One implant, everything as per the contract, no bone grafting was needed. It was important to me that everything was explained in advance — and it was (I couldn't believe it myself). The implant is indistinguishable from my own tooth!

ЕЕкатерина Д.5 June 2026
★ 4,0

The implant is indistinguishable from your own tooth. Honestly, I'm still surprised that there was no pain. The implantation was done right after the extraction, and it all fit into a single visit.

ЖЖанар З.1 June 2026
★ 5,0

Otkladyvala iz-za raboty, vse bylo nekogda Priehali iz drugogo rayona. Postavili implant na mesto shesterki, na osmotrah nichego ne doschityvali. V koridore pahnet ne bolnicey, a chem-to neytralnym.

The clinic administrator gives the patient a treatment plan at the front desk
Still have questions

Still have questions about "Implant-supported prosthetics"?

Message us on WhatsApp or give us a call — the clinic is open daily from 9:00 to 20:00. Initial examination and treatment plan — 0 ₸, free parking.

free parking133/6 Kanysha Satpayevaopen daily, no days off9:00 — 20:00Alatau City Bank — 24 months, Kaspi — 120% installment plan
Calculate the cost