+7 747 093 89 86Daily 9:00–20:00Book a visit

Tooth Filling in Almaty: Prices, Stages, Materials

Filling restores lost hard tissues of the tooth. The dentist examines the cavity, takes an X-ray if necessary, then performs anesthesia, preparation, isolation of the working field, and adhesive preparation. The material is selected according to the situation: composite, compomer, glass ionomer, or ceramic inlay. The exact cost is given after the examination; before it, only a preliminary range is visible.

Cost calculator

Find out the preliminary cost in 20 seconds

Question 1 / 5
Which tooth needs filling?
What is the depth of the lesion?
Which filling material do you prefer?
Is additional treatment needed?
Is anesthesia required?
One last step

Leave your contact details and we'll send the estimate and suggest a convenient time.

Request received

Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.

Nurpeis Ayaulym Doszhankyzy — dentist at Dental-Center dental clinic in Almaty, portrait in work uniformThe estimate is reviewed by the clinic's general dentist

How much does a dental filling cost in Almaty

Full price list

What makes up the price of a dental filling

The cost of the procedure depends on the extent of the lesion, the location of the tooth, and the chosen material. Preparation is assessed separately: diagnostics, anesthesia, and, if necessary, root canal treatment. The exact amount is given after the examination, so the price of a dental filling in Almaty is always calculated individually. At the initial appointment, the dentist draws up a plan and provides an estimate before starting work.

By material

What materials are used for dental fillings

Different materials suit different tasks, and the choice depends on where the defect is located and what conditions are present for the work.

Light-cured composites

The main material for restoring posterior and anterior teeth. The composite is applied in layers and cured with a polymerization lamp, which allows modeling the shape and shade. In some cases, this material is also suitable for corners and the incisal edge.

Glass ionomer cements

They are used in the treatment of primary teeth, cervical defects, and in situations where conditions for composite are limited — for example, with insufficient moisture isolation. The material releases fluoride into the surrounding tissues. The decision on use is made by the dentist based on the clinical picture.

Compomers and flowable composites

Flowable materials are used for small cavities and hard-to-reach areas where precise filling is important. Compomers occupy an intermediate position between composites and glass ionomers. The choice depends on the location of the defect and the load on the tooth.

Inlays and ceramic restorations

In case of significant destruction of the crown, an inlay may be made instead of a direct filling — it is modeled from an impression or scan and fixed in the cavity. This is a separate prosthodontic procedure with its own fabrication time. Indications are determined by the dentist after examination and X-ray.

Stages of dental filling

Step 01

Examination and diagnostics

The dentist examines the tooth, assesses the depth of the lesion and the condition of adjacent tissues. If necessary, an X-ray is prescribed — on a cone beam CT or a periapical X-ray. Based on the results, a treatment plan is drawn up.

Step 02

Anesthesia

Local anesthesia is administered before preparation. The dentist clarifies the allergy history and selects the drug. For superficial defects, in some cases anesthesia can be avoided — this is decided by the dentist.

Step 03

Isolation of the working field

The tooth is isolated from saliva with a rubber dam or cotton rolls. Dryness is important for material adhesion. At this stage, old failed fillings are removed, if any.

Step 04

Cavity preparation

The dentist removes the affected tissues and shapes the cavity for the material. The work is performed with magnification — the clinic uses a microscope with 25× magnification. This allows more precise control of the preparation boundaries.

Step 05

Application of the adhesive system

An etchant is applied to the prepared surface, followed by the adhesive. Each layer is distributed and cured with a lamp according to the material instructions. The fixation of the restoration depends on this stage.

Step 06

Tooth form restoration

The material is applied in layers, and each layer is cured with light. The dentist models the anatomical shape and contact points with adjacent teeth. Then grinding and polishing are performed.

Temporary and permanent filling: what's the difference

The difference between a temporary and a permanent filling lies in the task each one solves. One covers the tooth during treatment, the other restores it after all stages are completed.

Tasks of a temporary filling

A temporary filling is a protective dressing, not a treatment. It is placed when the tooth is not yet ready for permanent restoration: between visits, during root canal treatment, or when prosthetics are postponed. Its purpose is to isolate the cavity from saliva, food, and bacteria, keep the medication inside, and prevent tissue from shifting. The material is soft, easily removed with an instrument, and lasts from a few days to several weeks. Its strength is low, and chewing pressure on that area is not advisable. A separate purpose is diagnosis: the dentist observes how the tooth responds, whether there is pain, and whether the gum has become inflamed. If everything is stable, the dressing is replaced with a permanent restoration. If discomfort appears, the plan is adjusted. The cost of this procedure is lower: the material is inexpensive, and placement takes only minutes. The price of the permanent restoration is calculated separately, after treatment is completed.

When the permanent crown is placed

A permanent filling is placed at the final stage, when the cavity is cleaned, the canals are filled, and there is no inflammation. The material here is different: composite, ceramic, sometimes metal. It withstands chewing pressure, restores the shape of the tooth, and lasts for years. The dentist chooses the material based on the clinical picture: where the tooth is located, what the load is, and how much tissue has been lost. Its lifespan depends on hygiene, bite, and habits — there is no universal number. Before placement, the condition of the gum and neighboring teeth is assessed. If there are problems nearby, they are addressed first, otherwise the restoration will not hold. Sometimes a permanent filling is placed immediately: the cavity is small and intermediate stages are not needed. In complex cases, time passes between visits, and then a temporary dressing is essential. The decision is made by the dentist based on X-rays and examination.

Comparison by duration and materials

FeatureTemporaryPermanent
PurposeIsolation during treatmentRestoration of the tooth
MaterialSoft, easily removedComposite, ceramic, metal
Wear timeDays or weeksYears, depends on care
LoadChewing not advisableWithstands chewing pressure
When replacedAfter the stage is completedNot replaced while it holds
Who decidesDentist based on clinical pictureDentist based on X-ray and examination

How to prepare for a filling?

No special preparation is required, but a few details are worth thinking through in advance. They concern documents, food, and medications. Let's go through them in order. Some questions are best resolved before the visit.

What to bring and what to tell the dentist

  • Documents: bring your ID and insurance card, if you have one. If available, bring records, X-rays, and reports from other clinics: they will help the dentist see the progression.
  • List of medications: write down on a piece of paper the names and dosages of all medications you take regularly. This includes both those you take in a course and those you take occasionally.
  • Allergies and reactions: inform about intolerance to anesthetics, antibiotics, and any other substances. If you have had a reaction to an injection before, tell the dentist before the appointment begins.
  • Chronic conditions: name your diagnoses, even if they seem unrelated to your teeth. Diabetes, hypertension, and clotting problems affect the choice of treatment approach.
  • Pregnancy and breastfeeding: if you are expecting a child or breastfeeding, tell the dentist right away. They will select a suitable option for anesthesia and materials.
  • Questions: write down in advance what you want to clarify. For example, about the price of a filling — such a question is better asked to the administrator rather than the dentist during treatment.
  • Time: plan your visit so that you don't have to rush to other commitments afterward. A calm state helps both you and the dentist.

Is a special diet needed before the appointment?

No special diet is needed. But it makes sense to eat an hour or an hour and a half before the visit if lengthy treatment is planned. A hungry person tolerates the procedure worse, and after anesthesia you shouldn't eat right away — you could bite your cheek or tongue. If general anesthesia or sedation is planned, the rules are different: the doctor will ask you to come on an empty stomach, and this is discussed in advance. It's best not to drink coffee or strong tea before the appointment — they increase anxiety and blood pressure. Alcohol the day before is out of the question: it affects the action of anesthetics and increases the risk of bleeding. It's also worth abstaining from cigarettes on the day of the visit — nicotine constricts blood vessels. As for eating after treatment, it all depends on the clinical picture: sometimes you can eat right away, sometimes the doctor asks you to wait. Specific recommendations are given by the doctor after the filling. The question of cost is settled at the front desk, not in the chair.

The effect of medications and chronic conditions

Some medications change the course of treatment. Blood thinners, for example, can increase bleeding, and then the doctor decides whether the dosage schedule needs adjusting. You must not stop them on your own — that's dangerous. With hypertension, it's important that blood pressure is under control: a spike triggered by stress sometimes becomes a reason to reschedule the visit. Diabetes affects healing, so blood sugar levels on the day of the appointment matter. If you have asthma, it's worth bringing your inhaler. If you take hormonal medications or are undergoing chemotherapy, tell the doctor — the approach may change. The doctor also takes recent colds into account: with a fever, it's better to stay home. The decision on whether a tooth can be treated today is made by the doctor based on the X-ray and your condition. Sometimes it's enough to postpone the appointment by a few days so that everything goes more smoothly.

Specifics of filling front teeth

Front teeth are visible when talking and smiling, so the work is subject to higher esthetic requirements than the chewing teeth. Here, strength is not the only thing that matters.

Requirements for color and translucency

The enamel of front teeth is semi-translucent, and the dentin beneath it has its own shade. A restoration must replicate both. This can't be achieved with a single color from the shade guide: composite is applied in layers, where near the gum line the tone is denser and darker, and at the incisal edge the translucency is higher. The doctor looks at the tooth under different lighting — daylight, lamp light, against the background of skin and lips. The shade is selected before work begins, while the enamel hasn't dried out. Over-dried enamel lightens, and the material matched to it then darkens on the tooth. Translucency is set by the opaque and enamel layers: the first masks the see-through dentin, the second gives depth. A mistake in layer thickness shows up as a gray spot or, conversely, as a flat white patch. The restoration margin is placed into natural depressions and fissures so that the transition line doesn't show. A chip on the incisal edge and a cervical defect require different layering logic, and a single template doesn't work here.

Layering technique and shade selection

  • Determining the base shade: the doctor holds shade tabs against the tooth before saliva isolation, in daylight, and selects the tone based on the middle part of the crown, not the edge.
  • Dentin layer: opaque composite masks the see-through dentin and removes the gray tint from within; its thickness depends on the size of the defect.
  • Enamel layer: translucent material imitates the surface enamel; at the incisal edge it is thinner and lighter, at the neck of the tooth it is denser and darker.
  • Working in layers: each layer is cured separately, otherwise the material shrinks and pulls the margin with it, leaving a dark line underneath.
  • Checking under different light: the finished restoration is examined in daylight and under a lamp, because the shade reads differently under different light sources.

Polishing and finishing

After polymerization, the composite surface is rough, and plaque accumulates on it quickly. Finishing burs remove excess material and shape the contour. Next come abrasive discs and polishing pastes of varying grit, from coarse to the finest. The goal is for the surface of the restoration to match the enamel in gloss. The shine is checked dry, under directional light: a dull area at the margin reveals a poorly finished edge. The interdental spaces are treated separately — there, strips and floss are used, otherwise an overhanging edge remains that injures the gum. In some cases, finishing is supplemented with a laser if the contour of the gingival margin needs to be adjusted. Roughness also affects color: a dull surface looks lighter and flatter than it should. Polishing is not postponed — it is done in the same appointment. A few days later, the dentist assesses how the restoration behaves during chewing and how the gum adapts to it.

Specifics of filling posterior teeth

Posterior teeth bear the main load when chewing food. That is why the choice of material and the shape of the filling here have more requirements than on front teeth.

Chewing load and material selection

Posterior teeth experience greater pressure than incisors and canines. A filling must withstand compression, not chip at the edges, and not wear down faster than enamel. Composite materials are suitable for small cavities. If the defect occupies a significant part of the crown, the dentist may suggest a ceramic inlay or crown — the decision depends on the clinical picture and imaging findings. Cone-beam computed tomography helps assess the condition of the tissues under the filling and the depth of the lesion. Patients often ask how much a filling costs in Almaty, but price is secondary to which material is indicated in a particular case. First the dentist determines the extent of the destruction, then discusses the options. With posterior teeth, it is not worth skimping on strength: repeat treatment costs more. The material is selected taking into account the bite, habits, and the condition of the neighboring teeth. If the patient grinds their teeth at night, that also affects the choice.

Working with contact surfaces

Contact surfaces are the places where teeth touch each other. If a filling makes the contact too high or too low, food gets stuck between the teeth, the gum becomes inflamed, and the neighboring tooth may shift. The dentist restores a tight fit using matrices and wedges. The 3Shape intraoral scanner allows the shape to be checked before fixation. On posterior teeth, the contact point should be tight, but not excessive. Too tight a contact causes discomfort when chewing. Too weak a contact leads to food impaction and caries on the neighboring tooth. Therefore, after placing the filling, the dentist checks the contact with floss. If the floss passes with resistance but does not tear, everything is fine. When working with deep cavities, medicated liners are used. They protect the pulp from chemical and thermal irritation. Restoring the contact point is a painstaking part of treatment, and it is important not to rush here.

Restoring cusps and occlusion

  • Cusp anatomy: each posterior tooth has several cusps that guide food toward the center. The dentist restores their height and inclination so that chewing is even.
  • Occlusal contacts: after filling, the bite with the opposing teeth is checked. A filling that is too high causes pain and overload; one that is too low leads to incomplete chewing.
  • Articulating paper: a thin copy ribbon shows the contact points. The dentist identifies where the filling interferes and adjusts it until the bite is comfortable.
  • Fissures: natural grooves on the chewing surface. They are restored so that food does not get trapped and cause decay beneath the filling.
  • Polishing: after adjustment, the filling is smoothed and polished. A smooth surface retains less plaque, and the gum around it is not irritated.
  • Floss check: the floss should pass between the teeth without tearing or catching. This is the final check of the contact points after cusp restoration.
  • Adjustment by feel: the patient closes the teeth and says whether anything feels in the way. The dentist refines the filling until the bite feels natural.

What is cosmetic restoration and how does it differ from a filling?

A filling closes the defect. A restoration rebuilds the shape, color, and function of the tooth as a whole. These are different tasks, and the dentist decides based on the clinical picture.

Definition and goals

Cosmetic restoration is the rebuilding of the crown of the tooth with composite materials, taking into account the anatomy, color, and translucency of the enamel. The dentist sculpts the cusps, fissures, and equator, and if needed, the incisal edge. The work is done in layers: first the dentin shades, then the enamel shades. The goal is not just to close the cavity, but to return the tooth to its natural appearance and correct contact with its neighbors and opposing teeth. A filling addresses a narrower task: eliminating a defect within healthy tissue. It is placed for decay, for a small chip, or when replacing old material. Here the boundaries are set by the cavity itself. Restoration is needed when the defect affects an esthetically significant area or when the destruction is extensive. A front tooth with an enamel crack, a chipped corner, or a color change after an old filling are reasons to consider this option. Sometimes a patient asks how much it costs to fill a tooth, meaning esthetic restoration specifically. These are different approaches and different amounts of work. The dentist decides based on the X-ray and the condition of the tissues.

Differences in purpose and technique

CriterionFillingCosmetic restoration
PurposeClose the defectRestore shape and color
AreaAnyMore often front teeth and the visible zone
ExtentWithin the cavityUp to full coverage of the crown
MaterialComposite, glass ionomerComposite in layers, different shades
TechniqueSingle layer or 2 layersLayered sculpting
TimeShorterLonger
ShadesOne or twoSeveral, for enamel and dentin
ShapeBased on the defectBased on the tooth anatomy
IndicationDecay, small chipChip, crack, esthetics

When each option is chosen

The choice depends on the clinical picture. If the cavity is small, the walls are strong, and the area is not visible when smiling, a filling is usually enough. The material is placed in one or two layers, and the patient leaves with the defect closed. Another case is a chipped incisal edge or a crack in a front tooth. Here, not only strength matters, but also how the tooth looks. The dentist may suggest a restoration: selecting shades layer by layer, restoring translucency and shape. This does not mean the method is better or worse — each has its place. With deep destruction, when there is little tissue left, an inlay or crown is discussed. The dentist decides based on the X-ray and how the tooth responds to load. If the gum is inflamed or there is mobility, the inflammation is treated first. Sometimes a cone beam CT is needed to assess the condition of the roots and bone tissue. What to choose is a question not of fashion, but of the condition of the tooth.

What equipment is used for fillings?

Placing a filling is work measured in millimeters. The dentist needs instruments, light, and optics. Below is the basic set, isolation, and diagnostics. How accurately the shape of the tooth can be reproduced and contact with the neighboring teeth preserved depends on what the dentist works with and how.

Basic instrument set

  • Mirror and probe: examining the cavity, checking the edges and dentin sensitivity; indispensable during preparation and at the final check.
  • Burs and handpieces: turbine, contra-angle, and straight; the shape of the bur depends on the access — conservative or with cavity extension — and changing the handpiece changes the view of the working field.
  • Matrices and wedges: restore the contact point between teeth; without them the material sinks into the gum and interferes with the neighbors, and the contact itself then has to be redone.
  • Syringes and pluggers: place the composite in portions; the instrument is selected according to the depth and shape of the cavity so as not to leave voids or introduce excess air into the thickness of the material.
  • Polishing heads and discs: remove excess and restore smoothness; the final finish determines how the filling feels to the tongue and how quickly plaque accumulates on it.
  • Articulating paper: marks supracontacts; after filling, the dentist checks whether the tooth interferes with closure and, if necessary, the surface is adjusted.

Isolation of the working field and light

The rubber dam separates the tooth from saliva and gingival fluid. Without isolation, the composite absorbs moisture and loses marginal adaptation. Adhesive systems are applied in layers, each with its own role: the primer prepares the surface, the bond connects it to the material. The curing light initiates polymerization; its power and wavelength are selected for the material. How long to cure is decided by the dentist according to the composite's instructions. A laser is used to treat the edges and for hemostasis if the gum is bleeding. Isolation and light are not a decoration, but a condition under which the filling holds. In some cases the rubber dam can be avoided, but the dentist decides this based on the clinical picture. If the edge of the filling goes under the gum or an implant is nearby, the requirements for isolation change, and so does the set of instruments.

Diagnostics and monitoring

An X-ray is needed before filling. Cone beam CT shows the cavity in three dimensions, hidden carious lesions, and the condition of the roots. An intraoral scanner takes a digital impression: it shows the contacts and bite before and after. A microscope with 25× magnification helps to see cracks and remnants of old material. Class B autoclaves sterilize instruments between appointments. How much it costs to fill a tooth depends on the scope of work and the chosen method: the amount is made up of diagnostics, materials, and the number of visits. The exact amount is given after the examination. A follow-up X-ray shows how tightly the material fits against the cavity walls, whether there are voids or a high spot in occlusion. If X-rays are taken before and after, the dentist compares the picture and understands what was closed and what remains under observation.

How treatment proceeds and what affects the result

Key points of the procedure

A filling is not a one-time procedure but a sequence of steps. First, the dentist assesses the condition of the tissues, then excises the affected areas, and only after that restores the shape. The scope of intervention depends on the clinical picture. Sometimes a small restoration is enough; sometimes endodontic treatment is needed. The material is selected for the zone: on posterior teeth, resistance to load matters; on anterior teeth, optical properties matter. The bond of the composite to dentin and enamel is determined by the protocol: moisture isolation, etching, bonding. A breach at any stage affects how long the filling will last. Checking the occlusion after placement is a mandatory part of the appointment. A high filling causes discomfort when chewing and can lead to chips. The dentist checks the contacts with articulating paper and adjusts the surface. On anterior teeth, special attention is paid to translucency and shade: the restoration should not stand out against the neighboring teeth. For this, the composite is applied in layers, in different colors. A microscope helps to see the boundary between the filling and the tooth tissues, and a scanner is used when a digital impression is needed.

What to pay attention to afterward

The first hours after filling are a period of adaptation. Anesthesia wears off gradually, and until it has fully worn off, it is better to refrain from eating: you could bite your cheek or tongue without noticing. Sensitivity to temperature in the first days is a normal variant if it gradually fades. When the discomfort lasts longer or intensifies, this is a reason to contact the dentist. You should assess how well the filling fits the bite no earlier than after 24 hours: sensations on the first day are deceptive. Hygiene around the restoration is routine: a brush, non-abrasive toothpaste in the first days, dental floss. Staining products — coffee, wine, sauces — in the first 24 hours can affect the shade of the composite, especially on anterior teeth. Hard objects — nuts, pits, pens — should not be chewed regardless of whether there is a filling. A temporary filling is softer than a permanent one and requires more careful handling. Any unusual sensations — mobility, a sharp edge, a gap — are better shown to the dentist than waiting for the problem to become obvious.

When a follow-up visit is needed

The follow-up visit is scheduled by the dentist, and the reason may be either a routine check or a specific complaint. A routine examination a few months later allows assessment of the marginal fit and occlusion — things that are not always noticeable right away. If the filling has fallen out, chipped, or pain has appeared, the visit should not be postponed. Pain after filling can have different causes: from tissue overload, from a high filling, from nerve inflammation. It can only be sorted out at the appointment, sometimes with cone-beam computed tomography. A CT scanner provides a three-dimensional picture and helps to see what is not visible on a regular X-ray. A temporary filling is replaced with a permanent one within the timeframe determined by the dentist — this is related to the condition of the tissues underneath. A laser is used to treat the cavity or the gingival margin in certain cases, but the decision is always up to the dentist. You can book a follow-up appointment on any day; the clinic's schedule is daily from 9:00 to 20:00. If the filling has been in place for a long time and everything looks fine, an examination is still useful: changes under the filling can progress unnoticed.

Questions about dental fillings

We are open daily from 9:00 AM to 8:00 PM, seven days a week. The clinic is located in Almaty at 133/6 Kanysh Satpayev St., JAZZ Residential Complex. Phone for appointments — +7 747 093 89 86. Initial examination and treatment plan — 0 ₸.

Address: Almaty, 133/6 Kanysh Satpayev St., JAZZ Residential Complex. Parking for patients is free. Phone for appointments — +7 747 093 89 86. Appointments are available daily from 9:00 AM to 8:00 PM.

Warranty up to 5 years. The clinic has been operating since 1995, with a rating of 4.9 based on 312 reviews on 2GIS, Google, and Yandex. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 AM to 8:00 PM.

0% installment plans: from Jusan Bank for 24 months, from Kaspi for 12 months, and payment from the UAPF is available. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 AM to 8:00 PM. Phone for appointments — +7 747 093 89 86.

Initial examination and treatment plan—0 ₸. There is no separate fee for the first visit. Warranty on work—up to 5 years. 0% installment: from Jusan bank for 24 months, from Kaspi—for 12 months, payment from UAPF is available.

Parking is free. The clinic is in Almaty, 133/6 Kanysh Satpayev St., JAZZ residential complex. Appointments are available daily from 9:00 to 20:00. To book, call +7 747 093 89 86.

It is impossible to name a single figure: how much one filling costs depends on the material, the extent of the damage, and the restoration method. The price consists of the cost of anesthesia, the filling material, the dentist's work, and, if needed, additional procedures such as root canal treatment. The exact amount is given by the dentist at the examination after the X-ray, and you can see approximate figures in the price section on the page. The initial examination and treatment plan at our clinic are 0 ₸.

The cost varies: front teeth are more often restored with composite materials matched to the enamel shade, while chewing teeth require stronger materials designed to withstand chewing forces. That is why the price of a dental filling depends on which tooth is being treated, how many surfaces are damaged, and whether additional retention is needed. The exact amount is given by the dentist after an examination and X-ray, and you can see reference prices in the pricing section.

The phrase "fill a cavity" means treating tooth decay and restoring the tooth's shape with a filling, and the cost of filling a cavity in a tooth is determined by the depth of the damage: superficial decay costs less than deep decay that reaches the pulp. If the inflammation has affected the nerve, the root canals are treated first, and this is a separate service. The final amount is given by the dentist during the examination, and you can see reference prices in the pricing section on the page.

With deep decay, the price is higher than with superficial decay: the cost of placing a filling on a tooth depends on whether a medicated liner, wall reinforcement, and cusp restoration are required. Sometimes an inlay or crown is indicated instead of a filling — in that case, the treatment plan and cost are different. The decision is made by the dentist based on the X-ray, and the exact amount is given during the examination; reference prices are available in the pricing section.

The cost depends on the material and the amount of work, so it is impossible to answer with a single figure how much it costs to get a filling on a tooth — the amount is given by the dentist after the examination. Our clinic offers 0% installments: from Jusan bank for 24 months, from Kaspi for 12 months, and payment from the UAPF is also possible. You can see reference prices in the pricing section, and the treatment plan is drawn up at the initial appointment, which costs 0 ₸.

You should book an appointment as soon as possible: a fallen-out filling exposes the tooth tissues, and decay can progress further, while pain often indicates nerve inflammation or a poorly sealed filling. Before the visit, do not apply heat to the sore area, poke at the tooth, or chew on that side. The dentist will examine the tooth, take an X-ray if necessary, and offer a new filling or root canal treatment; you can book by phone at +7 747 093 89 86 daily from 9:00 to 20:00.

With pulpitis and periodontitis, the inflammation is treated first: in pulpitis, the nerve is removed or preserved and the canals are filled; in periodontitis, root canal treatment and monitoring are carried out, and only after that is the crown portion of the tooth restored with a filling or inlay. A filling cannot be placed over an inflamed pulp — this would lead to an exacerbation. The treatment plan is determined by the dentist based on the X-ray, sometimes using cone-beam computed tomography, and in complex cases a microscope with 25× magnification helps.

The lifespan of a filling is individual and depends on the material, the size of the defect, oral hygiene, habits such as nail biting, and how accurately the tooth's shape was restored. In some cases, fillings last for years, but under heavy load or with poor hygiene they may need replacement sooner. Regular hygiene and check-ups help extend the lifespan; the dentist assesses the condition of the filling at the appointment and suggests replacement if necessary.

Indications include tooth decay, chips, cracks, enamel wear, and restoring the tooth's shape after root canal treatment. Contraindications are relative: acute inflammation with swelling, allergy to the material components, inability to isolate the tooth from saliva, and situations where the remaining tissues are not strong enough and an inlay or crown is needed. The decision is made by the dentist based on the X-ray and after the examination; if necessary, cone-beam computed tomography is used.

Yes, fillings during pregnancy are possible, and there is no reason to postpone treatment: untreated tooth decay can worsen and require more complex intervention. The dentist selects safe materials and anesthesia, and also chooses a chair position taking the trimester into account; the second trimester is usually the most comfortable period. The treatment plan is drawn up after an examination and, if necessary, an X-ray, and it is best to coordinate the timing of the visit with the obstetrician-gynecologist overseeing the pregnancy.

Reviews about dental fillings

4,9
27 reviews on the site
27 ratings
ООльга К.14 September 2026
★ 5,0

I kept putting it off because of work, never had the time, and they treated pulpitis, two visits, they took a follow-up X-ray at the end — that's a whole separate story —. In my opinion, the main thing is that they don't pressure you into a decision. The filling isn't visible, the color matched, I've already gotten used to the thought that it's all behind me

ИИрина Н.11 September 2026
★ 5,0

Had a filling placed, the color was matched, Farrukh is a thorough doctor, attentive to every detail. Parking in the courtyard, found a spot, a small thing, but nice...

ААрман В.4 September 2026
★ 5,0

До этого ходил только по акции и толком не лечился — аяулым объясняет спокойнно и по делу. Не понравилось только одно: чуть дольше ждали приёма. Я бы вернулся сюда и со вторым зубом. Лечили кариес на жевательном.

ДДинара Л.11 July 2026
★ 5,0

My previous dentist moved away, so I had to find a new one. You can't see the filling, the color matches, and it feels like my own tooth. They redid the root canal under a microscope and took a follow-up X-ray at the end (I asked twice to confirm). I think the reason is that no one here is rushed.

ННаталья Т.25 May 2026
★ 5,0

I noticed the spot on the tooth myself and put it off for about three months. That's what won me over. They placed a filling, matched the color, and polished until it stopped catching.

ЖЖанна Б.25 April 2026
★ 5,0

The tooth ached at night, painkillers no longer helped. I was treated for a cavity on a chewing tooth. Rustam is a thorough doctor, down to the smallest detail (I asked twice).

Calculate the cost