+7 777 911 07 83Daily 9:00–20:00Book a visit

Composite Veneers in Astana: Price per Tooth and Placement Features

Composite veneers are overlays made of light-cured material on the front surface of a tooth. The price per tooth depends on the number of surfaces, the amount of sculpting, and the complexity of the case. Placement usually takes two visits, sometimes one. The exact amount and plan are given after an examination and imaging.

Cost calculator

Find out the preliminary cost in 20 seconds

Question 1 / 5
How many teeth do you plan to cover with veneers?
What is the condition of your tooth enamel?
What level of complexity do you expect for the work?
Do you need tooth preparation before veneer placement?
Which material do you prefer?
One last step

Leave your contact details and we'll send the estimate and suggest a convenient time.

Request received

Our coordinator will contact you during clinic hours, daily 9:00 — 20:00.

Tursunov Javlon Akramovich — dentist at the Dental-Center dental clinic in Astana, portrait in work uniformThe estimate is reviewed by the clinic's prosthodontist

How much does a composite veneer cost in Astana

Full price list
TreatmentDuration & warrantyPrice
Composite veneers, one toothfrom36 000 ₸Message on WhatsApp
E-max veneerfrom187 000 ₸Message on WhatsApp

What the cost consists of

The cost of composite veneers is made up of several parts: the amount of restoration, the number of teeth, the condition of the enamel, and whether preliminary preparation is needed — treatment of caries, professional hygiene. The doctor's work at the appointment is counted separately. The exact amount is given after an examination, because it depends on the clinical picture. Prices in tenge are provided at the consultation.

By method

Methods of making composite veneers

The division shows where the veneer is formed — directly on the tooth or in the laboratory, and this determines the course of the work.

Direct method

The dentist applies composite layer by layer directly onto the tooth, shapes the form and cures each layer with a lamp, then performs the finishing. The work is done in the chair, without an impression and without a laboratory. The dentist considers this method when correction of one or several teeth is needed and the shape is convenient to create in place.

Indirect method

The dentist takes an impression or scans the teeth, and the composite veneer is made from the model in the laboratory, after which it is bonded to the tooth. Unlike the direct method, a second visit is needed. The dentist considers it when the restoration involves several teeth and the contours are more accurately created on the model.

Stages of composite veneer placement: how it goes

Step 01

Examination and plan

At the initial appointment, the doctor examines the oral cavity, takes images, and draws up a plan. The amount of work, the number of teeth, and whether preparation is needed are discussed. Initial examination and treatment plan — 0 ₸.

Step 02

Preparation

Before placement, professional hygiene and treatment of caries, if present, are carried out. In some cases, bite correction or gum treatment is needed. Preparation takes separate visits.

Step 03

Placement

The doctor applies composite in layers directly onto the tooth and shapes its form. The work is done under magnification — the clinic has a microscope. Each layer is cured with a lamp. Several teeth are restored in one visit.

Step 04

Finishing

The finished restoration is polished and checked against the bite. The patient is explained how to care for it and a follow-up appointment is scheduled. After that — routine visits to assess the condition.

How many dental visits are needed for composite veneer placement?

Composite veneers are often placed in two appointments. Sometimes the doctor manages to do everything in one visit. The exact number depends on the clinical picture.

Standard scenario: two appointments

The first visit involves diagnostics and preparation. The dentist examines the oral cavity, takes images, and assesses the condition of the enamel and bite. Professional hygiene may also be performed on the same day. If there is caries or gum inflammation, these conditions are treated first. The second visit involves placement. The composite is applied in layers, each layer is cured with a lamp, then the shape is modeled and polished. Sometimes several days pass between appointments. This time is needed for the gums to settle after hygiene or treatment. The more preparatory procedures, the more visits. But the placement itself usually fits into a single appointment. The exact number of visits will be determined by the dentist after the examination. If the gums bleed or there is deep caries, preparation takes longer. The dentist may prescribe rinses or medicated pastes. Then the placement is postponed to a later date. Sometimes a patient comes with ready-made impressions from another clinic. They are still checked. Unsuitable ones are redone. This adds a visit. If the enamel is in good condition and the gums are calm, the second appointment takes less time. The dentist warns about possible difficulties in advance.

When it is possible to fit everything into one visit

A single appointment is possible if the enamel is healthy, the gums show no signs of inflammation, and the amount of work is small. For example, one or two teeth in the front area. Then diagnostics, hygiene, and placement are performed on the same day. The patient comes in the morning and leaves with finished veneers. But this is not always the case. The dentist assesses how much time each stage will take. If the enamel is thin or there are chips, additional preparation may be needed. In such cases, one visit is not enough. The decision is made by the dentist based on the image and examination. Sometimes the patient asks to do everything at once, but rushing is not always justified. If the patient takes medications that affect clotting, or has an allergy to anesthetic, the plan is changed. Then preparation and placement are separated by days. The dentist may schedule an additional examination after a few days. This is needed to make sure the gums have healed. In some cases, the patient comes from far away and asks to do everything in one go. The dentist may accommodate if there are no contraindications. But the decision remains with the specialist.

What shifts the timeline: the number of teeth and the condition of the enamel

  • Number of teeth: the more teeth involved, the longer the appointment lasts. One or two veneers are placed in an hour to an hour and a half, while six or more may require two visits.
  • Condition of the enamel: if the enamel is weakened or there are cracks, the dentist may postpone placement. First, the tissues need to be strengthened or caries treated.
  • Bite: with bite abnormalities, orthodontic treatment may be needed first. This is a separate stage that shifts the timeline for veneer placement.
  • Oral hygiene: plaque and tartar are removed before placement. If the gums are inflamed, treatment is prescribed and placement is postponed for several days.
  • Individual reaction: sometimes the gums take longer to recover after preparatory procedures. The dentist postpones placement to avoid complications.

Why composite veneers darken and what to do about it

A composite veneer, the price of which depends on the amount of work, changes color over time. Let's look at the reasons and what to do about it at an appointment.

Causes of color change

A composite veneer takes on color gradually. The surface of the material is porous at the micro level, and pigments from coffee, tea, wine, and sauces penetrate these pores. Smoking accelerates the process. Plaque accumulates at the gum edge if hygiene is poor. The composite itself darkens over time even without external pigments; this is a property of the material. On front teeth, the color is more noticeable than on side teeth. If a veneer is placed on a tooth with a filling, the shade may differ from the neighboring teeth. The dentist looks at where exactly the darkening is localized: along the edge, over the entire surface, or within the thickness of the material. This determines what to do next.

What can be done at the appointment

First, the doctor assesses the condition of the veneer and the tissues underneath. Minor surface staining is removed by polishing and paste. If the darkening has gone deeper, polishing will not help. In that case, replacement of the veneer or covering it with a new layer of composite is discussed. Sometimes it is enough to adjust the marginal area near the gum. At the clinic, professional hygiene is performed and home care is selected. The doctor explains which habits affect the color. The decision is made based on the clinical picture, not a template. If the veneer changes color due to gum problems, the gum is treated first. Veneer replacement is a separate procedure with its own stages. What exactly will suit you is decided by the doctor after an examination.

How to care for composite veneers so they last longer?

Composite is a material with a porous surface, and caring for it differs from caring for enamel. Below are everyday habits that extend the service life of restorations.

Home hygiene: brush, paste, floss

  • Brush: soft or medium, with even bristles. Hard bristles scratch the surface, pigment gets packed into microcracks, and the shade of the restoration turns gray.
  • Paste: without abrasives or whitening granules. An RDA index of up to 50 is a guideline worth checking on the tube. Whitening pastes are designed for enamel; on composite they simply create a matte finish.
  • Floss: waxed or flat, without a sharp jerk at the gum. Use a sawing motion along the edge of the restoration, otherwise the edge is lifted and plaque gets in.
  • Water flosser: sensitive gum mode, with the stream directed along the gum line, not into the junction of the restoration. Adjust the pressure by feel, without force.
  • Movements: sweeping, from the gum to the incisal edge, in a circle on each unit. Horizontal "scrubbing" wears down the edge and exposes the transition between the restoration and the tooth.
  • Additionally: alcohol-free mouthwash without coloring ingredients. Alcohol dries the mucosa, and dyes settle on composite faster than on enamel.

Habits and drinks that change color

Pigments settle in the surface layer of the composite, and brushing them away later will no longer work. Coffee, strong tea, red wine, cola, sauces with turmeric and tomato — all of these stain the restoration gradually, layer by layer. Smoking gives a yellow-brown shade that can only be partially removed by polishing. If the habit cannot be given up, there is a practical technique: after a drink, rinse your mouth with water and wait about half an hour before brushing. Immediately after acidic drinks, enamel and composite are softened, and at that moment the brush acts as an abrasive. Hard foods should also be reconsidered: cracking nuts, opening packages with your teeth, holding a pen or seeds in your teeth — a direct path to a chip along the edge. Ice in drinks is the same story. Caring for composite veneers does not cancel these everyday rules but makes them mandatory: a restoration does not repair itself the way enamel does. It is worth making a habit of examining your teeth after eating — this way a chip or darkened edge is noticed earlier than the doctor would at an appointment.

Protection for bruxism and checkups with the doctor

If a person grinds their teeth at night, composite lasts less — this is a fact, not a forecast. Nighttime load wears down the edge and loosens the bond. In such cases, the doctor suggests a protective night guard: it is made from an impression or a scan and worn during sleep. The guard does not treat bruxism; it takes the load upon itself. During the day, under stress, it helps to keep the jaws relaxed and not clench the teeth. Checkups — every six months or as prescribed by the doctor. At the appointment, the edge of the restoration, the condition of the gums, and the bite are checked, and polishing is performed if necessary. Polishing removes surface pigment and restores smoothness, but it cannot remove deep darkening — that already means replacement. A microscope and scanner at the clinic help to see the edge and assess the fit more accurately than with the naked eye. The decision about polishing or replacement is made by the doctor based on the clinical picture, not a photograph. Regular checkups are cheaper than redoing the work — but this is not a promise, just the usual logic of care.

What equipment is used to place composite veneers

The set of instruments at an appointment is not random. Some help the doctor see what the eye cannot assess, others help maintain the bonding protocol, on which the composite's retention on the tooth depends.

Basic unit and curing light

The foundation of the workspace is a dental unit with turbine and micromotor handpieces, and a set of burs for preparation and polishing. Composite material is applied in layers, and each layer is cured with a curing light. The wavelength and power are selected according to the material type, otherwise polymerization does not reach the full depth. Layers are kept thin so that light passes evenly through the thickness of the composite. Hence the requirements for the light: stable output, intact light guide, regular power checks. The light guide is treated after each patient, and the device is serviced according to regulations. Grinding and polishing heads, strips, discs, and pastes are used in the work — they shape the surface and the marginal contour. Working with composite is done with filtered glasses: the ultraviolet radiation from the light is harmful to the eyes. The outcome depends on the clinical picture, the precision of preparation, and how evenly each layer was placed.

Isolation of the working field and the adhesive protocol

  1. Rubber dam: a latex sheet with clamps isolates the tooth from saliva and gingival fluid; without a dry field, adhesion to enamel and dentin is unpredictable, and the marginal gap appears sooner than before.
  2. Retraction cord: a thin cord is placed in the gingival sulcus to retract the gingival margin and open access to the cervical area; sometimes retraction paste is used instead.
  3. Etching: enamel and dentin are treated with acid according to the protocol, then rinsed and dried; dentin is not overdried, otherwise collagen fibers collapse.
  4. Bonding: the adhesive is rubbed in with a brush, spread in a thin layer, and cured with the light; the bond between the composite and tooth tissues depends on this step.
  5. Composite and matrices: the material is applied in layers with a spatula, the shape is set with matrices and wedges, and each layer is cured separately with the light.
  6. Finishing: burs, discs, and pastes smooth the transition from the veneer to the natural enamel; polishing affects how the surface collects plaque and pigment.

Diagnostics, optics, and shade selection

DeviceWhat it provides at the appointmentWhat the doctor decides
Tomographthree-dimensional view of the tooth and bone tissuepreparation depth and root condition
Scannerdigital impression without tray and pasteaccuracy of margins and contact with adjacent teeth
Microscopemagnification of the working fieldvisibility of the marginal gap and small defects
Lasertreatment of soft tissuesthe need for gingival intervention
Shade guidecomparison of shades under different lightingcomposite shade to match adjacent teeth

Are composite veneers suitable for correcting the shape and color of teeth?

Composite veneers solve some aesthetic problems, but not all. Below is what they change, and where their capabilities end and a different plan is needed.

What they actually change: shape, length, shade, gaps

A composite veneer is a thin overlay on the front surface of a tooth. The dentist shapes it directly on the tooth or in the laboratory, so the shape and length are determined in advance. Chips, uneven edges, slanted angles — all of this is masked. The shade is matched to the neighboring teeth, and darkened enamel on one tooth can be evened out with the rest. Small gaps between the front teeth are also closed: the composite is applied in layers and covers the gap. A diastema a couple of millimeters wide can be removed this way. The overlay does not whiten the tooth from the inside; it changes what is visible from the outside. If a different color is needed for the whole row rather than a single tooth, whitening is discussed first, and then the overlays. The durability of the result depends on the thickness of the composite, habits, and hygiene — the dentist decides based on the clinical picture.

Where veneers don't work: bite and crowding

The overlay does not move the tooth. If a tooth is crooked or rotated around its axis, a veneer will not straighten it — it will follow the tilt, simply making the surface more even. Crowding, when teeth overlap each other, is also not solved by overlays: there is still not enough space in the row. Bite is a separate story. With a deep or crossbite, the front teeth contact in such a way that the composite chips or debonds. First the orthodontist aligns the row, and only then does the prosthodontist place the overlays. Sometimes correction of individual teeth is enough; sometimes braces or aligners are needed. There are also cases where aesthetics are addressed with a crown rather than a veneer. What will suit a specific case is determined by X-rays and impressions, not by a photo of a smile.

One tooth or the entire front row

SituationWhat is doneWhat to look at
Chipped toothVeneer on that toothShade matching to neighbors
Darkened incisorOverlay on one toothColor of the other teeth
Gap between two teethVeneers on both teethSymmetry of shape
Uneven edge of incisorsOverlays on a groupSmile line
Crowding of the rowOrthodontist firstBite and space in the row
Deep bitePlan is changedContacts when biting

How to prepare for composite veneer placement

Preparation begins with diagnostics and ends with a conversation about color. In between — treatment, if needed, and hygiene. Haste is a poor helper here.

Examination, X-rays, and bite assessment

First, the dentist examines the oral cavity and counts how many teeth fall within the planned restoration area. They look at the condition of the enamel, old fillings, crowns, exposed necks. The bite is assessed separately: how the upper teeth close with the lower ones, whether there are premature contacts, wear, signs of bruxism. A pathological bite changes the load on future restorations, and this affects the plan. Next — X-rays. A tomograph provides a three-dimensional picture of the jaws: roots, bone tissue, hidden cavities, and the position of tooth germs are visible. A scanner takes digital impressions — they make it easier to try on the shape and discuss it with the patient. Sometimes a periapical X-ray is enough; sometimes a tomograph is needed. The dentist decides based on the clinical picture. Based on the examination and X-rays, a plan is made: which teeth to prepare, to what extent, and what to treat before starting work.

Treatment before placement: caries, gums, hygiene

  • Caries and old fillings: affected tissue is removed, failed fillings are replaced. A veneer is placed on a healthy foundation — otherwise a process will begin underneath it, and the work will have to be redone.
  • Gum disease: inflammation, bleeding, and periodontal pockets are treated before prosthetics. An inflamed gum margin prevents the restoration from fitting precisely and provokes recurrence.
  • Professional hygiene: plaque and calculus are removed, the surface is polished. Clean enamel is a condition for adhesion, and calm gums react less to manipulation.
  • Self-care: at home, patients switch to a soft brush and non-abrasive toothpaste, and learn to use dental floss and interdental brushes. Habits formed now will persist after placement.
  • Treatment by related specialists: if therapy or surgery is needed, it is performed in advance. The prosthetic stage begins when the other tasks are completed.

Whitening and discussing color expectations

Color is the part of the plan where expectations most often diverge from reality. Composite is matched to the surrounding teeth, and if the natural teeth have darkened, the restoration will stand out. Sometimes whitening is performed before placement to even out the background. But not always: with enamel sensitivity, cracks, or deep fillings in the smile zone, the procedure is declined or postponed. The doctor decides based on the clinical picture. Whitening does not give an instant result: the color changes gradually, and the final shade is assessed after some time. Composite does not whiten along with the tooth — this is important to understand in advance. Therefore, the color of future veneers is selected after the natural teeth have stabilized. What is discussed is not an abstract "white" but a specific shade in daylight. The patient looks at samples, and the doctor explains how the material will behave on the tooth. If expectations do not match what is possible, it is better to agree before the work begins, not after.

What to remember

Visits and preparation

The number of visits is not fixed. It depends on the clinical picture: how many teeth are in the smile zone, what their shape is, and how the bite is structured. The doctor reviews the images and outlines a plan. Sometimes two appointments are enough; sometimes more are required. Preparation is also not universal. For some, hygiene is sufficient; for others, caries must first be treated or gum inflammation resolved. The doctor decides based on the scan. A tomograph and scanner help see what the eye cannot: the position of the roots, enamel thickness, and contacts with neighboring teeth. Without this, planning is blind. Rushing at the preparation stage costs more than a few extra visits. If the gum is inflamed, placement is postponed until healing. This is not a whim but a condition under which the material lies evenly and holds. It is worth coming to the first appointment with questions: what exactly is bothering you, and what result you want to see. The more specific the request, the clearer the plan.

Color and care

Composite material is porous. It absorbs pigments from food and drinks. Coffee, tea, red wine, sauces, berries — all of these gradually change the shade. It is impossible to avoid this completely. You can slow it down: rinse your mouth after eating, do not hold staining drinks in your mouth for long, and brush your teeth twice a day with a soft brush. Abrasive pastes and hard brushes leave micro-scratches in which dirt accumulates faster. Floss and interdental brushes are needed where the brush cannot reach: between the veneer and the neighboring tooth, at the gum margin. Professional hygiene removes surface plaque but does not restore the material's original color. Whitening does not affect composite: only natural enamel is lightened, while veneers remain as they were. If the difference has become noticeable, the doctor may polish the surface or replace individual elements. This is not restoration "as it was" but correction. The decision is made by the doctor after examination.

Doctor's decision based on the scan

No plan is built on a single examination. Imaging is needed: periapical X-rays, a panoramic X-ray, and sometimes a CT scan. They show whether there is hidden decay under an old filling, whether the enamel is thick enough, and how the teeth are positioned in the arch. A scanner provides a digital model that lets you try on the shape before treatment begins. This changes the conversation with the patient: discussing the silhouette is easier on a screen than in words. Sometimes a request for veneers is resolved with a different service — treatment or orthodontics. The dentist says this directly. The opposite situation also occurs: veneers are possible, but not on all teeth at once. Then the work is divided into stages. The lifespan of composite veneers depends on hygiene, bite, and habits — nail biting, opening packages with teeth. None of these factors cancels regular check-ups. Once every six months is a reasonable guideline; the exact frequency is determined by the dentist. If a veneer chips or shifts, don't delay: plaque develops quickly underneath.

Questions about composite veneers

We see patients daily from 9:00 to 20:00, including weekends. The clinic is in Astana, 11/1 Abay Avenue. Phone for appointments — +7 777 911 07 83. Initial examination and treatment plan — 0 ₸.

Address: Astana, 11/1 Abay Avenue. Parking for patients is free. Phone for appointments — +7 777 911 07 83. Appointments are available daily from 9:00 to 20:00.

Warranty from 3 years. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 to 20:00.

0% installment plans: from Jusan bank for 24 months, from Kaspi for 12 months, and payment from the UAPF is available. Initial examination and treatment plan — 0 ₸. Appointments are available daily from 9:00 to 20:00. Phone for appointments — +7 777 911 07 83.

Initial examination and treatment plan — 0 ₸. There is no separate fee for the first visit. Warranty on the work — from 3 years. 0% installment plan: from Jusan bank for 24 months, from Kaspi — for 12 months, and payment from the UAPF is available.

Parking is free. The clinic is in Astana, 11/1 Abay Avenue. Appointments are available daily from 9:00 to 20:00. Phone for booking — +7 777 911 07 83.

The price of a composite veneer depends on the extent of restoration, the number of composite layers, the complexity of shape and color, and whether preliminary tooth preparation is needed. The exact cost is given by the dentist during the examination after diagnostics, because a single tooth may require bite correction or treatment before placement. See the final amount in the price section on this page, where payment options are also listed. The initial examination and treatment plan at the clinic are 0 ₸, which allows you to discuss the estimate without obligation.

Composite onlays and veneers are similar concepts, but onlays more often cover the chewing surface or a significant part of the crown, while veneers mainly cover the front. In everyday speech, these terms may be used interchangeably, so during an appointment it is important to clarify which restoration the dentist means and what problem it addresses. This determines the extent of preparation, the material, and the cost, which is calculated after the examination.

Placing composite veneers includes diagnostics, planning, tooth preparation if needed, layer-by-layer composite modeling, and finishing — polishing and bite adjustment. In some cases, gum treatment, imaging, or temporary restorations are added if the clinical situation requires it. The full list of stages and their cost is recorded by the dentist in the treatment plan after the examination, and the final amount can be found in the price section on the page.

In some cases, composite veneers are placed without reduction if the composite thickness allows adding volume without compromising the bite and contacts with neighboring teeth. The decision is made by the dentist based on the X-ray and after the examination: sometimes minimal polishing within the enamel is enough, while other times more extensive preparation is required. If you want to preserve as much tissue as possible, mention this at the initial appointment — the dentist will assess whether this option is possible in your situation.

If a composite veneer chips or debonds, you should schedule an appointment as soon as possible, without trying to repair it yourself with glue or home remedies. Before the visit, save the broken fragment if you have it, and avoid putting stress on that tooth, especially with hard food. At the clinic, the dentist will assess the condition of the veneer and the tissues underneath: in some cases repair is possible, while in others a new veneer is indicated. If the debonding is accompanied by pain or tooth mobility, the visit should not be postponed.

Yes, the clinic provides a warranty of 3 years or more, but its terms depend on the type of work and adherence to care recommendations. The warranty does not cover cases of trauma, excessive load, bruxism, or failure to maintain hygiene, so during the appointment the dentist explains what is included in the obligations and what is not. To understand the details specifically for composite veneers, ask during the consultation: there you can also clarify which check-ups are included in the warranty period.

Composite veneers are most often used on the front teeth, where shape and color matter, but in some cases they are also placed on the back teeth if the thickness of the composite and the bite allow it. Back teeth bear a higher load, so the dentist assesses the risk of chipping and may suggest another type of restoration, such as an inlay or a crown. The decision is made based on an X-ray and after an examination: if you want to close the defect specifically with a veneer, discuss this with the prosthodontist at the initial appointment.

Placing composite veneers is usually done with local anesthesia, so the patient does not feel pain during the procedure; afterward, temporary sensitivity is possible, which goes away within the next few days. If the preparation is minimal or there is none, the discomfort may be less, but everything depends on the condition of the tooth and the gum. The dentist will choose the type of anesthesia taking into account your individual characteristics and explain what to do if sensitivity is increased after the appointment.

Composite veneers are made from composite material in layers, often right at the appointment, while ceramic veneers are made in a laboratory from an impression or a scan. Composite is usually repairable and requires less preparation, but it may change color faster and accumulate pigment; ceramic is more resistant to staining, but it is harder to adjust if it chips. The choice depends on the goal, the condition of the enamel, and the budget, so the dentist compares the options during the examination rather than prescribing one universal solution.

The service life of composite veneers depends on hygiene, habits, load, and how regularly you have check-ups; on average, they need to be refreshed or polished sooner than ceramic ones. Composite can accumulate pigment from coffee, tea, and tobacco, and can also chip under high loads, so it is important to come in for preventive appointments. During the examination, the dentist will assess the condition of the veneers and advise when correction is needed, without promising a specific time frame in advance.

Reviews of composite veneers and the clinic's dentists

4,9
25 reviews on the site
25 ratings
ВВиктория Ж.8 September 2026
★ 5,0

Had veneers done on four front teeth, the shape was adjusted twice. . . In short: good. Margarita is the kind of doctor you come back to. The lab made them in nine days, as promised. The crown is indistinguishable from your own teeth. The hallway doesn't smell like a hospital, but like something neutral.

ГГульнара Б.16 July 2026
★ 5,0

Zapisyvalas po sovetu kollegi s raboty, ne ozhidala, chto budet voobsche ne bolno. Zamenili staryy most na koronki. Napisali v messendzher na sleduyuschiy den, sprosili pro samochuvstvie. Zhevat stalo udobno s pervogo dnya. Bahily, stakanchik, salfetka — melochi, no vse na meste, spasibo i za eto. Rassrochku oformili na meste, bez begotni po bankam, meloch, a priyatno. Kabinet svetlyy, oborudovanie novoe. Ceny nazvali srazu, v konce nichego ne dobavilos, etogo ranshe nigde ne bylo. Dogovor i chek vydali bez napominaniy, etogo ranshe nigde ne bylo.

ММадина Е.3 July 2026
★ 5,0

I had veneers done on my four front teeth, and they finished on time. Chewing became comfortable from the first day, and the difference is noticeable. Overall, I don't regret it.

ЖЖанар Б.24 June 2026
★ 5,0

The color matched, no one notices anything — in my opinion, the price is fair for this kind of work. . . The only downside was that the parking was taken, but it didn't affect my impression. Erasyl explains everything calmly and to the point. They placed a zirconia crown.

ДДанияр Ж.15 June 2026
★ 5,0

I made an appointment on the advice of a colleague from work. The color matched, no one notices anything. They replaced the old bridge with crowns, the shape was adjusted twice — that's a whole other story —!

ААйгуль А.16 April 2026
★ 5,0

Replaced the old bridge, gave the price in advance, and in the end it didn't change. I had to confirm the timeline twice. He opened the instruments in front of me. Aset is a master of his craft. Now I'll only go here)

Calculate the cost